user manual

7-24
NO
The charging circuit
is OK.
YES
NOTE:
Make sure that the battery is fully charged.
S Is the charging voltage within specification?
EAS00776
4. Stator coil assembly resistances
S Remove the generator cover.
S Connect the pocket tester (Ω 1) to the sta-
tor coil assembly coupler as shown.
Stator coil resistance
0.19 X 0.21 Ω at 20_C
S Is the stator coil assembly OK?
YES
Replace the stator
coil assembly.
NO
Tester positive probe  white
Tester negative probe  black
1
2
S Measure the stator coil assembly resis-
tances.
Tester positive probe  white
Tester negative probe  black
1
3
5. Brush check
S Remove the brush holder .
Brush spring force
5.10 X 5.69 N (0.52 X 0.58 kg)
Brush overall length <wear limit>
13.7 mm <4.7 mm>
S Are the brush spring and brush OK?
YES
Replace the brushes
and brush spring as a
set.
NO
S Check the brush spring.
S Measure the overall length of brushes.
EAS00777
1
CHARGING SYSTEM
ELEC