User Manual
• Event Control
◦ [Add] button
The “Add Event” dialog box will appear.
Here you can add an event.
◦ [Edit] button
The “Edit Event” dialog box will appear.
Here you can edit the contents of the currently selected event. If no event is selected, the button is
dimmed.
◦ [Clear] button
Deletes the currently selected event. If no event is selected, the button is dimmed.
◦ [All Clear] button
Deletes all registered events.
•
[Show Event Time] check box
If this is selected, the time of the event is shown in the month display.
•
Event Info
This shows the information that was specified in the “Add Event” dialog box or “Edit Event” dialog box for
the selected event.
◦ OperationType
Indicates the operation that will be executed when the event occurs.
◦ RepeatType
Indicates the frequency with which the event will occur.
◦ Set Exception
Indicates a date and time for which, as an exception, the event will not occur.
•
[OK] button
Saves the settings and closes the dialog box.
•
[Cancel] button
Closes the dialog box without saving the changes.
14. Audio Processors : MTX5-D/MTX3
188 | ProVisionaire Design User Guide