User Manual
③ ZONE GROUP matrix
Specify a zone group if you want a single zone/message select button of a PGM1/PGX1 to broadcast to multiple
zones. Click on the matrix to select Zones to add to the Zone Group. You can specify up to 24 zone groups.
④ [CLEAR] button
Clears the ZONE GROUP that had been set.
■ "PGM1/PGX1" editor
Here you can make assignments for the zone/message select buttons of the PGM1 and PGX1, and make
settings for the PTT button.
•
PGM1 select list box
Select the PGM1 unit for which you want to make settings.
PGM1/PGX1 settings can be made even if PGM1 is not connected to the MTX itself. Please
connect PGM1/PGX1 properly during operation.
•
[Function Assign] tab
Here you can assign functions to the zone/message select buttons of the PGM1 or PGX1.
“FUNCTION” provides the following choices.
◦ [No Assign]
No function is assigned to the button.
◦ [Zone]
Selects/de-selects the zone to broadcast.
When selected, the zone/message indicator is lit.
◦ [Zone Group]
Selects/de-selects multiple zones to broadcast in a single operation.
Set the zone group using the “ZONE GROUP” editor.
The zone/message indicator is lit when broadcast is possible to all zones that are registered in the
14. Audio Processors : MTX5-D/MTX3
ProVisionaire Design User Guide | 227