User Manual

Bounce Mode Performance (Layer 14) / Push Mode Performance (Layer 15)
TNR-i Quick Guide 13
Bounce Mode Performance (Layer 14)
Tap an LED button and the light will “drop” from that button, bounce back from the bottom of the matrix, and repeat. The
corresponding note will sound when the light bounces at the bottom row. The higher the entry point, the longer the interval
between the sound. In the Bounce mode the pitches are arranged horizontally, like a piano, with the lowest pitch on the left and
the highest on the right.
Bouncing can be individually stopped in any column by simply tapping the lowest LED button in that column.
Push Mode Performance (Layer 15)
In this mode if you touch and hold an LED button the sound of the corresponding note will begin to change gradually while the
flashing surrounding that button gets brighter and wider. If the button is held briefly the note and flashing will stop when you
release it, but if you hold the button for longer the note and flashing will continue even after the button is released.
Pitch
Stop a note by tapping
the central LED button.