User Manual

Menu List
TNR-i Quick Guide 18
Menu List
Regarding menu items marked with an asterisk (*), refer to the TENORI-ON Manual PDF at the following URL.
http://www.global.yamaha.com/tenori-on/downloads/
Play Menu
Parameters that apply to all layers and blocks.
Master Tempo*
Sets the master tempo.
Master Scale*
Sets the master scale.
The “Major Pentatonic” and “User” scales are provided in the TNR-i, in addition to the scales of the
hardware TENORI-ON.
Master Transpose*
Sets the transposition.
Master Loop Speed*
Sets the loop speed (beat duration) for all layers.
Master Loop Point*
Sets the loop range for all layers.
Reset Loop Timing
Resets the playback position to the beginning of the loop.
 You can reset loop timing by holding the [L4] and tap the [R1] .
Mute
Mutes sound output.
 You can control Mute on/off by holding the [R4] and tap the [L1] .
Swing Rate
Sets the “swing” feel.
Produces a “swing” feel by shifting the timing of the back beats. The smaller the rate, the shorter the
repeat interval with the previous LED button. A setting of “0” produces no swing.
 This function applies to Score mode layers only.
 When using a swing feel, changing the loop's point and speed, and inputting the performance
data into layers other than Score mode, etc., may shift the timing between layers.
Range ..................-23 – 0 – +23
Default ................0
LED buttons.........No display
Color
Sets the color of the active note LED.
Range ..................White, Blue, Purple, Pink, Red, Orange, Green, Blue Green
Function Color
Sets the color of the function LED.
You can select the LED color which is shown when the function button [L1] – [R5] is touched.
Range ..................White, Blue, Purple, Pink, Red, Orange, Green, Blue Green
Indicator Color
Sets the color of the loop indicator.
Range ..................White, Blue, Purple, Pink, Red, Orange, Green, Blue Green
Brightness
Adjusts the brightness of the LED buttons
Move the slider rightward to increase brightness and leftward to lower it.