Owner`s manual

– 15 –
9 Be sure to service battery leads to prevent arc-
ing when the battery is not installed.
9 Disconnect the battery charging output lead.
Then insulate the generator side connector by
folding it back on itself and carefully wrapping
it with electrical tape to prevent electrical con-
tact with ground (earth) or any other leads.
9 Remove the battery leads from the generator.
1 Connector
2 Battery leads
3 Electrical tape
WARNING
2
1
762-004
3
1
762-005
7DA-F8199-12-A 2011.2.18 14:57 Page 15