Manualshelf

Owner`s manual

ManualsBrandsYamaha ManualsDo-It-Yourself toolsTP-4000
21222324252627282930
– 21 –
Connection
Alternating Current (AC)
Be sure any electric devices are turned off before
plugging it in.
9 Be sure all electric devices including the lines
and plug connections are in good condition
before connection to the generator.
9 Be sure the total load is within generator rated
output.
9 Be sure the receptacle load current is within
receptacle rated current.
TIP
Make sure to ground (earth) the generator.
When the electric device is earthed, always the gener-
ator must be earthed.
NOTICE
WARNING
A
1. Start the engine.
2. Plug in to the AC receptacle.
3. Make sure the voltage meter indicates the rated
voltage.
å Voltage meter
7DA-F8199-12-A 2011.2.18 14:57 Page 21