Owner`s manual

– 28 –

Be sure no foreign material enters the crankcase.

7. Install the oil filler cap.

NOTICE

Air filter

1. Remove the screws, and then remove the air filter

case cover.

2. Remove the foam element.

1 Screws

2 Air filter case cover

3 Foam element

3. Wash the foam element in solvent and dry it.

Never use solvent while smoking or in the vicinity

of an open flame.

4. Oil the foam element and squeeze out excess oil.

The foam element should be wet but not dripping.

Do not wring out the foam element when squeez-

ing it.

This could cause it to tear.

5. Insert the foam element into the air filter case.

The engine should never run without the foam ele-

ment; excessive piston and cylinder wear may

result.

NOTICE

WARNING

710-037a

Recommended oil:

Foam-air-filter oil or SAE #20 motor oil

7DA-F8199-12-B 2011.2.21 13:11 Page 28