Owner`s manual

– 30 –

711-022

711-050

5. Remove the carbon deposits on the muffler

screen and spark arrester using a wire brush.

When cleaning, use the wire brush lightly to avoid

damaging or scratching of the muffler screen and

spark arrester.

6. Check the muffler screen and spark arrester.

Replace them if damaged.

7. Install the spark arrester.

TIP

Align the spark arrester lump to the hole in the muffler

pipe.

1 Spark arrester lump

2 Hole

8. Install the muffler screen and muffler cap, then

tighten the bolt.

9. Install the muffler cover by installing the muffler

cover bolts.

NOTICE

711-029a

711-027a

Muffler cover bolt torque:

7 Nm (0.7 m·kgf, 5.1 ft·lbf)

7DA-F8199-12-B 2011.2.21 13:11 Page 30