User Manual

9
TP70 Owner’s Manual
Using the stereo audio cable provided, connect the TP70 drum pad’s output to a suitable input jack on
your DTX drum module. At this time, ensure that the L-shaped end of the cable is plugged into the drum
pad’s [OUTPUT] jack.
In order to protect both the cable and the jack from damage, be sure to hook the cable around
the cord clip.
If the drum pad produces no sound, proceed as follows.
 Ensure that the pad is correctly connected to a suitable input jack on your DTX drum module using
the cable provided.
For more troubleshooting tips, refer to the Owner’s Manual that came with your DTX drum module. If
you still cannot find the information you need to resolve a problem, please contact your Yamaha dealer
or a customer support center for assistance.
Connecting
Troubleshooting
Specifications
 TP70 Drum Pad
 External dimensions: 220 (diameter) x 68 (h) mm (not including S wing bolt)
 Weight: 0.9 kg (including S wing bolt)
 Sensing method: Piezoelectric trigger-sensor element x 1
 Output jack: Standard stereo-audio jack
*: Specifications and descriptions in this Owner’s Manual are for information purposes only. Yamaha Corporation
reserves the right to change or modify products or specifications at any time without prior notice. As specifica-
tions, hardware, and optional extras may not be the same in every region, please check with your Yamaha
dealer for details.
TP70
DTX drum module
Cord clip
OUTPUT