User Manual

8
TP70S Owner’s Manual
As shown in the figures, set up your pad on an electronic drum rack or a standard tom stand (such as a
Yamaha WS series product).
1. Take the snare pad (q) and the S wing bolt (w) from the package and lightly tighten the S wing bolt
(w). (Five or six turns is sufficient.)
2. Slide the pad (q) onto the tom holder or hexagonal bolt (e) from the rack or tom stand, and then
tighten the S wing bolt (w) to secure it in place.
Setting Up
CAUTION
If the wing bolt and other fasteners are not sufficiently tightened, your pad may fall, possibly
causing injury. It is important, therefore, that you mount your pad securely on the drum rack or
stand. In addition, you should avoid placing your rack or stand on an uneven surface as this
may cause it to fall over, again increasing the risk of injury.
w
q
e
q
w