User Manual
SR-X50A
EN
FR
ES
Safety Brochure
Brochure sur la Sécurité
Folleto de Seguridad
VFJ0150
© 2022 Yamaha Corporation
Published 07/2022
KSOD-A0
UCARLP
Sound Bar
Barre de son
Barra de Sonido
(1003-M06 plate bottom en 01)
(529-M04 FCC class B YCA 01)
(529-M02 FCC sdoc YCA 02)
NOTICE (For U.S.A.)
• This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment and meets the FCC
radio frequency (RF) Exposure Guidelines. This equipment
should be installed and operated keeping the radiator at least
20 cm or more away from person’s body.
• This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
NOTICE (For Canada)
• This equipment complies with ISED radiation exposure limits
set forth for an uncontrolled environment and meets RSS-102
of the ISED radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the
radiator at least 20 cm or more away from person’s body.
• This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- 1. This device may not cause interference.
- 2. This device must accept any interference, including
interference that may cause undesired operation of the
device.
• For indoor use only.
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE USE. BE
SURE TO FOLLOW THESE INSTRUCTIONS.
The precautions listed below are to prevent risk of harm to
the user and others, as well as to prevent property damage,
and to help the user use this unit properly and safely. Be
sure to follow these instructions.
After reading this manual, be sure to keep it in a safe place
where it can be referenced at any time.
This content indicates “risk of serious injury or death.”
If you notice any abnormality
• If any of the following abnormalities occur, immediately turn
off the power and disconnect the power plug.
- The power cord/plug is damaged.
- An unusual smell, unusual sound or smoke is emitted from
the unit.
- Foreign material or water gets into the interior of the unit.
- There is a loss of sound during use.
- There is a crack or damage in the unit.
Continued use could cause electric shocks, a fire, or
malfunctions. Immediately request an inspection or repair
from the dealer where you purchased the product or from
qualified Yamaha service personnel.
Power supply
• Do not do anything that could damage the power cord.
- Do not place it near a heater.
- Do not bend it excessively or alter it.
- Do not scratch it.
- Do not place it under a heavy object.
Using the power cord with the core of the cord exposed could
cause electric shocks or a fire.
• Do not touch the power plug or cord if there is a chance of
lightning.
Failure to observe this may cause electric shocks.
• Use the sound bar and subwoofer with the power supply
voltage printed on them.
Failure to connect to an appropriate AC outlet may cause a
fire, electric shocks, or malfunctions.
• Be sure to use the supplied power cords.
Failure to observe the above may cause a fire, burns, or
malfunctions.
• Do not use the supplied power cords for other devices.
Failure to observe the above may cause a fire, burns, or
malfunctions.
• Check the electric plug periodically and remove any dirt or
dust which may have accumulated on it.
Failure to observe this may cause a fire or electric shocks.
• When setting up the unit, make sure that the AC outlet you are
using is easily accessible.
If some trouble or malfunction occurs, immediately turn off
the power switch and disconnect the plug from the AC outlet.
Even when the power switch is turned off, as long as the
power cord is not unplugged from the wall AC outlet, the unit
will not be disconnected from the power source.
• If not using the unit for long periods of time, be sure to unplug
the power plug from the AC outlet.
Failure to observe this may cause a fire or malfunctions.
Installation
• Install in the manner instructed in the manual.
Falling or toppling may result in injury or damage.
Do not disassemble
• Do not disassemble or modify this product.
Failure to observe this may cause a fire, electric shocks, injury,
or malfunctions.
Water warning
• Do not expose the unit to rain, use it near water or in damp or
wet conditions, or place on it any containers (such as vases,
bottles or glasses) containing liquids which might spill into
any openings or places where water may drop. A liquid such
as water getting into the unit may cause a fire, electric shocks,
or malfunctions.
• Never insert or remove an electric plug with wet hands. Do
not handle this unit with wet hands.
Failure to observe this may cause electric shocks or
malfunctions.
Fire warning
• Do not place any burning items or open flames near the unit,
since they may cause a fire.
Handling
• Be careful not to drop or apply strong impact to this unit.
Failure to observe this may cause electric shocks, a fire, or
malfunctions.
EN Safety Brochure
The model number, serial number, power requirements,
etc., may be found on or near the name plate, which is at the
bottom or rear of the unit. You should note this serial
number in the space provided below and retain this manual
as a permanent record of your purchase to aid identification
in the event of theft.
Model No.
Serial No.
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved
by Yamaha may void your authority, granted by the
FCC, to use the product.
2. IMPORTANT: When connecting this product to
accessories and/ or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to
comply with the requirements listed in FCC
Regulations, Part 15 for Class “B” digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and,
if not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If
this product is found to be the source of interference,
which can be determined by turning the unit “OFF”
and “ON”, please try to eliminate the problem by using
one of the following measures:
• Relocate either this product or the device that is
being affected by the interference.
• Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line
filter/s.
• In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is 300
ohm ribbon lead, change the lead-in to co-axial type
cable.
If these corrective measures do not produce
satisfactory results, please contact the local retailer
authorized to distribute this type of product. If you can
not locate the appropriate retailer, please contact
Yamaha Corporation of America, 6600 Orangethorpe
Avenue, Buena Park, CA 90620, U.S.A.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
COMPLIANCE INFORMATION STATEMENT
(Supplier’s declaration of conformity procedure)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Avenue, Buena Park,
CA 90620, U.S.A.
Telephone : 714-522-9011
Type of Equipment : Sound Bar
Model Name : SR-X50A, ATS-X500
This device complies with Part 15 of FCC Rules. Operation is
subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference
that may cause undesired operation.
• Be sure to request inspections or repairs from the dealer
where you purchased the unit or from qualified Yamaha
service personnel.
• Yamaha cannot be held responsible for injury to you or
damage of the products caused by improper use or
modifications to the unit, or data that is lost or destroyed.
• This product is for ordinary homes. Do not use for
applications requiring high reliability, such as managing
lives, health care or high-value assets.
WARNING
Battery for the remote control
• Do not disassemble a battery.
If the contents of the battery get on your hands or in your
eyes, it can cause blindness or chemical burns.
• Do not dispose of a battery in fire.
• Do not expose the battery to conditions of extreme low air
pressure, cold or heat (such as in direct sunlight or a fire) or
excessive dust or humidity.
Doing so may result in the battery bursting, causing a fire or
injury.
• Do not attempt to recharge batteries that are not intended to
be charged.
Charging could cause the battery to burst or leak, which can
cause blindness, chemical burns, or injury.
• If the batteries do leak, avoid contact with the leaked fluid.
If the battery fluid should come in contact with your eyes,
mouth, or skin, wash immediately with water and consult a
doctor. Battery fluid is corrosive and may possibly cause loss
of sight or chemical burns.
Wireless function
• Do not use this product near medical devices or inside
medical facilities.
Radio waves from this product may affect electro-medical
devices.
• Do not use this product within 15 cm (6 in) of persons with a
heart pacemaker implant or a defibrillator implant.
Radio waves from this product may affect electro-medical
devices, such as a heart pacemaker implant or defibrillator
implant.
This content indicates “risk of injury.”
Power supply
• Do not use an AC outlet where the power plug fits loosely
when inserted.
Failure to observe this may cause a fire, electric shocks, or
burns.
• When disconnecting the power plug, always hold the plug
itself and not the cord.
Pulling by the cord can damage it and cause electric shocks or
a fire.
• Insert the power plug firmly all the way into the AC outlet.
Using the unit when it is not plugged in sufficiently can cause
dust to accumulate on the plug, causing a fire or burns.
Installation
• Do not place the sound bar or subwoofer in an unstable
position where it might accidentally drop or fall over and
cause injuries.
• When installing this unit, do not obstruct heat dissipation.
- Do not cover it with any cloth.
- Do not install it on a carpet or rug.
- Do not install the unit in other ways than indicated.
- Do not use the device in a confined, poorly-ventilated
location.
Failure to observe the above may trap heat inside the
product, causing a fire or malfunctions. Ensure that there is
adequate space around the sound bar: least 10 cm (4 in) on
top, 10 cm (4 in) on the sides, and 10 cm (4 in) on the rear.
Ensure that there is adequate space around the subwoofer: at
least 20 cm (8 in) on top, 20 cm (8 in) on the sides, and 20 cm
(8 in) on the rear.
• Do not install the unit in places where it may come into
contact with corrosive gases or salt air or places that have
excessive smoke or steam.
Doing so may result in malfunction.
• Avoid being near the unit during a disaster, such as an
earthquake.
Since the unit may tip over or fall and cause injury, quickly
move away from the unit and go to a safe place.
• Before moving this unit, be sure to turn off the power switch
and disconnect all connection cables.
Failure to observe this may damage the cables or cause you or
someone else to trip and fall.
• For proper mounting the sound bar on a wall, make sure to
have it done by the dealer from where you purchased this
product or by qualified service personnel.
Failure to observe this may cause the installation to fall and
result in injury. Installation requires special skills and
experience.
Hearing loss
• Do not use this product for a long period of time at a high or
uncomfortable volume level, since this can cause permanent
hearing loss. If you experience any hearing loss or ringing in
the ears, consult a physician.
• Before connecting the unit to other devices, turn off the
power for all devices.
Failing to do so may result in hearing loss, electric shock, or
device damage.
Maintenance
• Remove the power plug from the AC outlet before cleaning
the unit.
Failure to observe this may cause electric shocks.
Handling
• Do not insert your hand or fingers into the bass reflex port on
the front side of the subwoofer.
Failure to observe this may cause injury.
• Do not insert foreign materials such as metal or paper into the
bass reflex port on each side of the sound bar or on the front
of the subwoofer.
Failure to observe this may cause a fire, electric shocks, or
malfunctions.
• Be sure to observe the following:
- Do not stand or sit on the unit.
- Do not put heavy items on top of the unit.
- Do not place the unit in a stack.
- Do not apply unreasonable force to buttons, switches,
input/output terminals, etc.
- Do not hang on the unit installed on a wall.
- Do not lean against the unit installed on a wall.
Failure to observe these may cause injuries or damage to the
unit.
• Avoid pulling the connected cables to prevent injuries or
damage to the unit by causing it to fall.
• Do not operate the unit if the sound is distorting.
Prolonged use in this condition could cause overheating and
result in fire.
Battery for the remote control
• Do not use batteries other than specified batteries.
Doing so may cause fire or burns, or result in fluid leakage that
may cause skin inflammation.
• Do not put in a pocket or bag, carry, or store batteries
together with pieces of metal.
The battery could short, burst, or leak, causing a fire or injury.
• Always make sure all batteries are inserted in conformity with
the +/- polarity markings.
Failure to do so might result in a fire, burns, or inflammation
due to fluid leaks.
• When the batteries run out, or if the unit is not to be used for
a long time, remove the batteries from the remote control to
prevent possible leakage of the battery fluid.
• When storing or discarding batteries, insulate the terminal
area by applying tape, or some other protection.
Mixing them with other batteries or metal objects can cause a
fire, burns, or inflammation due to fluid.
• DO NOT INGEST BATTERY, CHEMICAL BURN
HAZARD
The remote control supplied with this
product contains a coin/button cell battery.
If the coin/button cell battery is swallowed,
it can cause severe internal burns in just
2 hours and can lead to death.
Keep new and used batteries away from
children. If the battery compartment does
not close securely, stop using the product
and keep it away from children.
If you think batteries might have been
swallowed or placed inside any part of the
body, seek immediate medical attention.
CAUTION
Notice
Indicates points that you must observe in order to
prevent product failure, damage or malfunction and data
loss.
Power supply
• If not using the unit for a long period of time, be sure to
unplug the power plug from the outlet. Even if the sound
bar is turned off, a minute current is still flowing.
Installation
• Do not use this unit in a location that is exposed to direct
sunlight that becomes extremely hot, such as near a
heater, or extremely cold, or that is subject to excessive
dust or vibration. Failure to observe this may cause the
unit's panel to become deformed, the internal components
to malfunction, or for operation to become unstable.
• If using a wireless function, avoid installing this unit near
metal walls or desks, microwave ovens, or other wireless
network devices.
Obstructions could shorten the transmission distance.
Connections
• Do not connect this product to a public Wi-Fi and/or
Internet Service directly. Only connect this product to the
Internet through a router with strong password
protections. Consult your router manufacturer for
information on optimum security practices.
• If connecting external devices, be sure to thoroughly read
the manual for each device and connect them in
accordance with the instructions.
Failure to properly handle a device in accordance with the
instructions could cause malfunctions.
• Do not connect this product to industrial devices.
This product has been designed to connect to consumer-
use devices. Connection to an industrial device could cause
this product to malfunction.
Handling
• Do not place vinyl, plastic, or rubber products on this unit.
Failure to observe this may cause discoloration or
deformation in the panel of this unit.
• If the ambient temperature changes drastically (such as
during unit transportation or under rapid heating or
cooling) and there is a chance condensation may have
formed in the unit, leave the unit for several hours without
turning on the power until it is completely dry before use.
Using the unit while there is condensation can cause
malfunctions.
Maintenance
• If the temperature or humidity changes drastically, water
droplets (condensation) may form on the subwoofer's
surface. If water droplets form, immediately wipe them off
with a soft cloth. If water droplets are left on the
subwoofer, they may be absorbed into the wooden parts,
causing deformation.
• When cleaning the unit, use a dry, soft cloth. Using
chemicals such as benzine or thinner, cleaning agents, or
chemical scrubbing cloths can cause discoloration or
deformation.
Disposal or transfer
• Before you transfer ownership or dispose of this product,
initialize the product settings to default. If you transfer
ownership or dispose of this product without initializing
the settings, your personal data may be stolen by a third
party.
• If you plan to transfer ownership of this product, include
this document and the supplied accessories along with the
product.
• Follow the rules of your local authority to dispose of this
product and its accessories.
• Be sure to discard used batteries in accordance with local
regulations.
(583-M01 percholorate 01)
• This applies only to products distributed by Yamaha
Corporation of America
This product contains a battery that contains perchlorate
material.
Perchlorate Material—special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate.