User Guide Sound Bar SR-X50A EN
CONTENTS CONTENTS ABOUT THIS USER GUIDE 5 Information on the descriptions in this User Guide......................................... 5 INTRODUCTION 6 Features.. ................................................................................................ 6 Confirming the included items.. ................................................................ 11 PART NAMES AND FUNCTIONS 13 Part names of the sound bar (front/top).. ...................................................
CONTENTS Connecting wireless speakers.. ................................................................. 42 PLAYBACK 43 Basic control during playback.. ................................................................. 43 Adjusting the sound to your preference...................................................... 45 Sound functions of this product.. ...........................................................................................................................................
CONTENTS Updating the firmware of this product.. ..................................................... 74 Setting the HDMI signal format.................................................................. 75 Connecting a subwoofer manually............................................................. 76 Initializing the sound bar.......................................................................... 77 TROUBLESHOOTING 78 Check the following first when any problem occurs..................................
ABOUT THIS USER GUIDE > Information on the descriptions in this User Guide ABOUT THIS USER GUIDE Information on the descriptions in this User Guide ( This User Guide uses the following signal words for important information. WARNING ( This content indicates “risk of serious injury or death.” CAUTION ( ( ( ( ( ( ( ( This content indicates “risk of injury.
INTRODUCTION > Features INTRODUCTION Features This product is a bar-shaped speaker system for your TV that allows you to easily enjoy surround sound on the TV with a rich sense of presence. By connecting the product to the Internet, audio playback from streaming services and use of the voice assistant “Amazon Alexa” are also available. In addition, this product is compatible with “TRUE X SURROUND” that provides real surround sound using wireless speakers as surround speakers for the product.
INTRODUCTION > Features n Produce real surround sound using the TRUE X SURROUND function The TRUE X SURROUND function provides real surround sound just by using TRUE X SURROUND compatible wireless speakers as surround speakers for the sound bar. When playing audio in ALL mode of the TRUE X SURROUND function, the same audio is output from the sound bar and from the wireless speakers. This mode is useful for playing audio as background music in a large room.
INTRODUCTION > Features n Easily play audio content from streaming services or a Bluetooth device Streaming services Bluetooth device AirPlay 2 Related links ( ( ( “Streaming services” (p.54) “Listening to audio from a Bluetooth® device” (p.52) “Listening to audio with AirPlay 2” (p.
INTRODUCTION > Features n Amazon Alexa built-in Alexa, turn up the volume. Alexa, what’s the weather today? Related links “Controlling the sound bar by voice commands (Amazon Alexa)” (p.63) n Configure the sound to match the situation Clear Voice This function focuses on the acoustic image of human voices such as dialog and narration within the audio and emphasizes the voices without changing the overall volume or individuality of the sound.
INTRODUCTION > Features n Multiple control methods to suit various usage situations In addition to the sound bar’s controls and the included remote control, the TV’s remote control, the dedicated smartphone app “Sound Bar Controller”, or Amazon Alexa can also be used to control the sound bar. Audio Return Channel (eARC/ARC) and HDMI Control function An HDMI control function compatible TV allows for controlling the sound bar’s basic functions using the TV’s remote control.
INTRODUCTION > Confirming the included items Confirming the included items The following items are included with this product. Make sure that all of the included items are present. n Main devices ( Sound bar (SR-CUX50A) ( Subwoofer (SW-X100A) n Accessories ( Remote control * A Lithium battery (CR2025) has already been inserted into the remote control. ( Power cords (×2) ( Digital optical audio cable ( Spacers (×2) * Use when mounting the sound bar on a wall.
INTRODUCTION > Confirming the included items * Use when mounting the sound bar on a wall. ( Quick Start Guide ( Safety Brochure NOTE An HDMI cable is not included. If you intend to use an HDMI cable to connect this product, get one that is commercially available. Choose an HDMI cable according to the functions of the device to be connected.
PART NAMES AND FUNCTIONS > Part names of the sound bar (front/top) PART NAMES AND FUNCTIONS Part names of the sound bar (front/top) This section describes the part names and functions of the front and top of the sound bar. c a b d e f h a g i f j e d Power button Turn the sound bar on and off. b Microphones Use when interacting with Alexa. NOTICE ( c Do not use a vacuum cleaner or air duster on the microphone area when cleaning the sound bar. Doing so may damage the microphones.
PART NAMES AND FUNCTIONS > Part names of the sound bar (front/top) d Height speakers e Front speakers f Built-in subwoofers g Remote control sensor h Alexa Indicator Indicates the status of Alexa. i Microphones Off Indicator Glows red when the microphones for interacting with Alexa are turned off. j Indicators The indicators on the top panel flash or glow to show the operation and setting status.
PART NAMES AND FUNCTIONS > Part names of the sound bar (rear) Part names of the sound bar (rear) This section describes the part names and functions of the rear of the sound bar. a b c a HDMI IN jack (p.31) b HDMI OUT/TV (eARC) jack (p.27) c NETWORK jack (p.39) d TV input jack (p.25) e UPDATE ONLY jack d e Use to update the sound bar’s firmware. For details, see the following Firmware Update Guide. https://manual.yamaha.
PART NAMES AND FUNCTIONS > Part names of the subwoofer Part names of the subwoofer Front panel Rear panel CONNECT STANDBY c CONNECT STANDBY SETUP d UPDATE ONLY a b a Bass reflex port b AC power input connector Use to connect the power cord of the subwoofer. c CONNECT indicator Glows when the subwoofer is connected to the sound bar (p.37). d STANDBY indicator Indicates the status of the subwoofer (p.118). e SETUP button Use to manually connect the subwoofer to the sound bar (p.76).
PART NAMES AND FUNCTIONS > Part names of the remote control Part names of the remote control This section describes the part names and functions of the remote control. b a c d e f h i g k l j m n a ) (Action) button Wake Alexa (p.63). b z (Power) button Turn this product on and off (p.37). c Input source buttons Select an audio input source (p.43).
PART NAMES AND FUNCTIONS > Part names of the remote control d Sound mode buttons Switch to your preferred sound mode (p.45). e ( STEREO ( STANDARD ( MOVIE ( GAME ALL button Enable or disable the ALL mode. For details, see the following TRUE X SURROUND Connection and Operation Guide. https://manual.yamaha.com/av/truexsur/ f CLEAR VOICE button Enable or disable the Clear Voice function (p.50). g BASS EXT button Enable or disable the Bass Extension function (p.51).
PART NAMES AND FUNCTIONS > Part names of the remote control NOTE Use the remote control within the range shown in the following illustration: Within 6 m Remote control sensor Related links “Part names of the sound bar (front/top)” (p.
PREPARATION > Preparation PREPARATION Preparation To play audio on this product, do the following preparations: 1 Install the sound bar and subwoofer. “Installing the product” (p.23) 2 Connect the sound bar to a TV. Connect the sound bar to the TV using a method suitable for the type of jacks on the TV and the functions to be used. “Jacks of TV to connect to and cables to use” (p.25) “Connecting to a TV using only the included digital optical audio cable” (p.
PREPARATION > Precautions for preparation Precautions for preparation Before installing the sound bar and connecting other devices, be sure to read the following precautions. Be sure to follow the precautions. n Precautions for installation WARNING ( ( ( ( ( Install as instructed in the User Guide. Failure to observe this may cause devices to fall and result in injury. Confirm that the finished installation is safe and secure. Also, carry out safety inspections periodically.
PREPARATION > Precautions for preparation n Precautions for connections WARNING ( ( ( ( ( ( ( Use this product with the power supply voltage printed on it. Failure to observe this may cause a fire, electric shocks, or malfunctions. Be sure to use the supplied power cord. Do not use the supplied power cord for other devices. Failure to observe this may cause a fire, electric shocks, or malfunctions. Never insert or remove an electric plug with wet hands. Do not handle this product with wet hands.
PREPARATION > Installing the product Installing the product ( Before installing the sound bar, be sure to read the following precautions. “Precautions for preparation” (p.21) ( Install the sound bar and subwoofer as shown in the following illustration. Place the subwoofer to the side of the sound bar. To prevent sound from reflecting off the wall, point the front of the subwoofer slightly inward.
PREPARATION > Installing the product NOTICE ( Ensure the following amount of space around the product so as not to interfere with heat dissipation. Sound bar: at least 10 cm (4 in) above, 10 cm (4 in) to the left and right, and 10 cm (4 in) behind Subwoofer: at least 20 cm (8 in) above, 20 cm (8 in) to the left and right, and 20 cm (8 in) behind The top of the sound bar is equipped with built-in height speakers that output the sound of the height channels.
PREPARATION > Connecting to a TV Connecting to a TV Jacks of TV to connect to and cables to use In order to fully use the functions of the sound bar, connect the TV and the sound bar with an HDMI cable. An HDMI cable is not included with this product. Prepare a commercially available HDMI cable that is compatible with the functions of the device to connect to. (See below.) When connecting to an HDMI input jack not compatible with ARC, also connect the included digital optical audio cable.
PREPARATION > Connecting to a TV Transmitting high-definition video signals to the TV from an AV device connected to the HDMI IN jack on the sound bar Use an HDMI cable that supports the transmission of video signals output from the AV device. ( For 3D and/or 4K video signals, use a Premium High Speed HDMI cable. ( For HDR video signals, use an HDR-compatible HDMI cable.
PREPARATION > Connecting to a TV Connecting to a TV using an HDMI cable (commercially available) ( Before connecting devices, be sure to read the following precautions. “Precautions for preparation” (p.21) ( If a TV is connected via an HDMI cable, the sound bar can be controlled by the HDMI Control function using the TV’s remote control.
PREPARATION > Connecting to a TV HDMI OUT/TV (eARC) jack Video device’s video signal HDMI HDMI input jack HDMI IN HDMI Control signal TV’s audio signal Sound bar (rear) OPTICAL TV Audio output (digital optical) jack TV jack Remove the caps on both ends of the cable and connect them. Cable to use Digital optical audio cable (included) HDMI HDMI HDMI cable (commercially available) NOTE ( ( ( ( ( ( ARC is an abbreviation for Audio Return Channel.
PREPARATION > Connecting to a TV Related links “Enabling/disabling the HDMI Control function” (p.
PREPARATION > Connecting to a TV Connecting to a TV using only the included digital optical audio cable ( Before connecting devices, be sure to read the following precautions. “Precautions for preparation” (p.21) ( Connect to a TV using the included digital optical audio cable. The digital optical audio cable transmits the TV’s audio signal to the sound bar.
PREPARATION > Connecting an AV device Connecting an AV device Connecting an AV device to the sound bar Before connecting devices, be sure to read the following precautions. “Precautions for preparation” (p.21) ( ( Connect AV devices (such as BD/DVD players and set top boxes) to the sound bar using an HDMI cable (commercially available).
PREPARATION > Connecting an AV device Related links “Enabling/disabling the HDMI Control function” (p.
PREPARATION > Connecting an AV device Connecting an AV device to the TV’s HDMI input jack ( Before connecting devices, be sure to read the following precautions. “Precautions for preparation” (p.21) ( Connect AV devices (such as BD/DVD players and set top boxes) to the TV using an HDMI cable (commercially available). To connect multiple AV devices or switch AV devices for playback using the TV’s input selector, use this connection method.
PREPARATION > Connecting an AV device NOTE ( To play audio from an AV device via the sound bar, set the input sources as follows: Sound bar’s input source: TV TV’s input source: AV device playing the content ARC is an abbreviation for Audio Return Channel. By connecting the ARC-compatible HDMI input jack on the TV to the ARCcompatible HDMI output jack on the sound bar or an AV receiver via an HDMI cable, audio from the TV can be played on the sound bar or AV receiver without using an optical cable.
PREPARATION > Connecting to power Connecting to power After connecting to the TV and AV devices, connect the sound bar and subwoofer to power. Power cord (included) To an AC wall outlet Sound bar (rear) CONNECT STANDBY SETUP UPDATE ONLY Power cord (included) To an AC wall outlet Subwoofer (rear) After connecting the power, some of the indicators on the front of the sound bar flash for approximately one minute as follows, and then turn off.
PREPARATION > Preparing the remote control Preparing the remote control Remove the battery insulating strip before attempting to use the remote control. Battery insulating strip Related links “Replacing the remote control battery” (p.
PREPARATION > Turning on and off the sound bar Turning on and off the sound bar Turn this product on and off. 1 Press the z (Power) button on the remote control. Pressing the button turns the product on and off. z (Power) When the sound bar is turned on, all the indicators on the front of the sound bar glow, and then some indicators remain glowing to show the setting status (normal display). When the sound bar is turned off, the indicators go off.
PREPARATION > Connecting to a network Connecting to a network Network functions If the sound bar is connected to a network, the following network-based functions are available. ( Various streaming services ( Amazon Alexa ( Playback with AirPlay ( Controlling the sound bar with the app The sound bar supports wired and wireless connections. Connect the sound bar to a network with the wired or wireless connection method based on your network environment.
PREPARATION > Connecting to a network Connecting to a network using a network cable (wired connection) Connect the sound bar to a router using a commercially available LAN cable (a CAT-5 or higher STP straight cable). The wired connection is now complete. Internet Router WAN LAN Modem LAN cable NETWORK jack Smartphone NOTICE ( Do not connect this product to a public Wi-Fi and/or Internet service directly. Only connect this product to the Internet through a router with strong password protections.
PREPARATION > Connecting to a network Connecting to a network wirelessly (wireless connection) Connect to a wireless LAN router (an access point) to use a network. Configure wireless connection settings using the dedicated smartphone app “Sound Bar Controller.” [Search tag]#Q02 Network Internet Wireless LAN router (access point) Modem Smartphone NOTICE ( Do not connect this product to a public Wi-Fi and/or Internet service directly.
PREPARATION > Connecting to a network 2 Follow the app screen instructions to configure. When connected to a wireless network, the Wi-Fi indicator on the sound bar glows. Glows white When the sound bar is connected to a network for the first time after purchase, its firmware is updated to the latest version. Once the network connection settings have been configured, configure Amazon Alexa. Follow the app screen instructions to configure.
PREPARATION > Connecting wireless speakers Connecting wireless speakers For real surround playback with the TRUE X SURROUND function, connect dedicated wireless speakers (sold separately) to the sound bar. Sound bar Front (left) Front (right) Surround (left) Surround (right) Wireless speakers For the connection procedure of wireless speakers, see the following TRUE X SURROUND Connection and Operation Guide. https://manual.yamaha.
PLAYBACK > Basic control during playback PLAYBACK Basic control during playback This section describes the basic control operations available during playback. n Selecting an input source Press one of the following input source buttons on the remote control.
PLAYBACK > Basic control during playback If audio is being output from both the TV speakers and the sound bar, mute the TV. To temporarily mute the sound bar, press | (Mute) on the remote control. To unmute, press | (Mute) again or press VOLUME (+/-). While muted, the indicators will show the following. Flash Related links ( ( ( ( ( ( ( ( “Surround playback” (p.47) “Stereo playback” (p.48) “Adjusting the volume of the subwoofer” (p.49) “Playing back human voices clearly (CLEAR VOICE)” (p.
PLAYBACK > Adjusting the sound to your preference Adjusting the sound to your preference Sound functions of this product This product is equipped with sound modes for surround playback and for stereo playback. There are also various sound settings for adjusting the sound to suit your preferences even better. n Sound modes A sound mode can be selected from among three sound modes for surround playback and one sound mode for stereo playback.
PLAYBACK > Adjusting the sound to your preference Bass Extension The acoustic image of bass sound is enhanced when the Bass Extension function is enabled. It reproduces rich bass sound with strong presence by clarifying the acoustic image of bass sound without disturbing the balance of the overall sound. NOTE Depending on the audio signal being played, it may take several seconds before sound is heard when switching sound settings. Related links ( ( ( ( “Surround playback” (p.47) “Stereo playback” (p.
PLAYBACK > Adjusting the sound to your preference Surround playback Press STANDARD, MOVIE, or GAME on the remote control to switch to surround playback. Surround sound can be heard not only from horizontal directions, but also from varying heights. Select your preferred sound mode according to the content viewed or listened to. NOTE ( The sound bar uses the following technologies to achieve a full surround sound experience. Dolby Atmos: An object-based surround technology.
PLAYBACK > Adjusting the sound to your preference Stereo playback Press STEREO on the remote control to switch to stereo playback (2-channel stereo). NOTE To cancel stereo playback, press one of the following buttons: STANDARD, MOVIE, or GAME. Related links “Sound functions of this product” (p.
PLAYBACK > Adjusting the sound to your preference Adjusting the volume of the subwoofer Adjust the volume of the subwoofer only. Press SUBWOOFER (+/-) on the remote control to adjust the volume.
PLAYBACK > Adjusting the sound to your preference Playing back human voices clearly (CLEAR VOICE) The human voices within the audio can be heard more easily without turning up volume when the Clear Voice function is enabled. The function is recommended for enjoying movies or dramas at a low volume, and for movies or dramas that use a lot of background music and sound effects. Press CLEAR VOICE on the remote control to enable or disable the function.
PLAYBACK > Adjusting the sound to your preference Enjoying rich bass sound (BASS EXT) The acoustic image of bass sound is enhanced when the Bass Extension function is enabled. The subwoofer volume remains the same, but the overall acoustic image of bass sound is adjusted to be more clear. Therefore, the presence of the acoustic image of the bass sound can be emphasized without disturbing the balance of the overall sound.
PLAYBACK > Listening to audio from a Bluetooth® device Listening to audio from a Bluetooth® device Audio content from a Bluetooth device can be played through the sound bar. Bluetooth device 1 Press BLUETOOTH on the remote control to switch the input source of the sound bar to Bluetooth. The sound bar enters the connection wait status, and the BLUETOOTH indicator flashes. Flashes 2 On the Bluetooth device, enable the Bluetooth function.
PLAYBACK > Listening to audio from a Bluetooth® device 3 Select the sound bar on the Bluetooth device. Yamaha SR-X50A xxxxxx When the connection is established, the BLUETOOTH indicator on the sound bar stops flashing and starts glowing blue. Glows blue 4 Start playback on the Bluetooth device. The sound bar will begin playing audio from the Bluetooth device. NOTE ( ( ( Enabling the network standby function allows the sound bar to be turned on automatically when a Bluetooth device connects to it.
PLAYBACK > Playing music using Sound Bar Controller Playing music using Sound Bar Controller Streaming services Content distributed by various streaming services on the Internet can be heard on the sound bar. Use the dedicated app for each streaming service or interact with Alexa to select streaming services and content. See the product information page on the Yamaha website regarding which streaming services are currently supported by the product.
PLAYBACK > Playing music using Sound Bar Controller Playing audio files using the Sound Bar Controller app Play audio from a smartphone or media server (computer or NAS) via a network with the Sound Bar Controller app installed on your smartphone. Refer to the Sound Bar Controller app for more information. Smartphone Media server (NAS, etc.
PLAYBACK > Playing music using Sound Bar Controller NOTE ( ( ( ( ( Audio is played in stereo regardless of the sound mode setting when Sound Bar Controller is used for playing an audio file. Copyright-protected files cannot be played. To play music files on the media server via the sound bar, you need to enable the media sharing setting on each device or media server software. See the documentation supplied with each device or software for more information.
PLAYBACK > Listening to audio with AirPlay 2 Listening to audio with AirPlay 2 Audio content can be played with AirPlay 2 on the sound bar. Tap (or click) the AirPlay icon on your iPhone or iTunes/Apple Music app and select the sound bar as the output destination. CAUTION ( If the volume is adjusted on an AirPlay device, the volume may become unexpectedly loud, causing hearing impairment or damage to the device. If the volume becomes too loud during playback, stop playback immediately.
ADDITIONAL FEATURES > Changing the brightness of the indicators ADDITIONAL FEATURES Changing the brightness of the indicators Change the brightness of the indicators of the sound bar to one of three levels: “Bright”, “Dim”, or “Off”. The brightness is “Dim” by default. 1 2 Turn on the sound bar. Press # (Brightness) on the remote control. Press the button to change the brightness in the order of “Dim”, “Off” and “Bright”.
ADDITIONAL FEATURES > Using a TV’s remote control to control the sound bar (HDMI Control) Using a TV’s remote control to control the sound bar (HDMI Control) When the sound bar is connected to a TV via an HDMI cable, the sound bar can be controlled using the TV’s remote control. This is called the HDMI Control function. TV’s remote control (example) a b c a Turn the power on and off Both the TV and the sound bar turn on/off at the same time.
ADDITIONAL FEATURES > Showing the type of audio signal and settings for functions Showing the type of audio signal and settings for functions The type of audio signal being played and settings for the sound bar’s functions can be checked. 1 Press INFO on the remote control. The indicators on the sound bar will show the following information on the type of audio signal and the settings for functions for three seconds immediately after INFO is pressed.
ADDITIONAL FEATURES > Showing the type of audio signal and settings for functions g Connection of a surround speaker (left) Glows white: connected Off: not connected h Connection of a surround speaker (right) Glows white: connected Off: not connected NOTE If only one wireless speaker is registered, the Wi-Fi indicator glows white and the UPDATE indicator glows green when it is connected. When the wireless speaker is not connected, both the Wi-Fi and UPDATE indicators are off.
ADDITIONAL FEATURES > Controlling the sound bar with the smartphone app (Sound Bar Controller) Controlling the sound bar with the smartphone app (Sound Bar Controller) By installing the free dedicated app “Sound Bar Controller” on a smartphone, the sound bar can also be controlled from that smartphone. [Search tag]#Q02 Network Search for “Sound Bar Controller” on the App Store or Google Play and install it on the smartphone.
ADDITIONAL FEATURES > Controlling the sound bar by voice commands (Amazon Alexa) Controlling the sound bar by voice commands (Amazon Alexa) Amazon Alexa Is a cloud-based voice AI (Artificial Intelligence) provided by Amazon. Simply speak to the sound bar to wake Alexa and use voice commands to control the sound bar, play music, and more. [Search tag]#Q03 Amazon Alexa An Amazon account is required to use Alexa. The sound bar also needs to be connected to the Internet.
ADDITIONAL FEATURES > Controlling the sound bar by voice commands (Amazon Alexa) Since Alexa responds differently depending on what it has learned, it may not function as intended even if you give it commands as in the examples above. If so, try another expression. NOTE ( ( ( ( ( ( Alexa is a service provided by Amazon. This service may be changed, stopped, or terminated without notice.
CONFIGURATION > Enabling/disabling the HDMI Control function CONFIGURATION Enabling/disabling the HDMI Control function Enabling the HDMI Control function allows the sound bar to be controlled using the TV’s remote control. Default setting: Enabled 1 2 Turn off the sound bar. Press and hold HDMI on the remote control for at least five seconds. The HDMI Control function switches from enabled to disabled, or from disabled to enabled.
CONFIGURATION > Switching the HDMI audio output destination Switching the HDMI audio output destination Switch the device that outputs audio that is input via the HDMI IN jack on the sound bar when the HDMI Control function is disabled. The default setting is for the sound bar to output the audio. Sound bar The sound bar will output audio that is input via the HDMI IN jack. TV The TV will output audio that is input via the HDMI IN jack. 1 2 Turn off the sound bar.
CONFIGURATION > Enabling/disabling the Auto Power Standby function Enabling/disabling the Auto Power Standby function When the Auto Power Standby function is enabled, the sound bar turns off in any of the following situations. ( No control operations for eight hours ( No signal input and no control operations for 20 minutes If you want to avoid forgetting to turn off the sound bar, enable the Auto Power Standby function. Default setting: Enabled 1 2 Turn off the sound bar.
CONFIGURATION > Enabling/disabling the Child Lock function Enabling/disabling the Child Lock function Enabling the Child Lock function locks the controls of the sound bar to prevent accidental operation. Even if the Child Lock function function is enabled ,)(Microphones on/off) can be operated. Default setting: Disabled (the controls are unlocked) 1 2 Turn off the sound bar. Press and hold INFO on the remote control for at least five seconds.
CONFIGURATION > Enabling/disabling the network standby function Enabling/disabling the network standby function When the network standby function is enabled, the sound bar is turned on and off by operating a smartphone or Bluetooth device as follows: Default setting: Enabled ( When the sound bar is off, the following operations will turn the sound bar on: Playing with AirPlay Playing audio content from a smartphone Interacting with Alexa (with the microphones enabled) ( ( ( ( ( When a Bluetooth devic
CONFIGURATION > Enabling/disabling the Bluetooth function Enabling/disabling the Bluetooth function The Bluetooth function can be disabled. Default setting: Enabled 1 2 Turn off the sound bar. Press and hold BLUETOOTH on the remote control for at least five seconds. The Bluetooth function switches from enabled to disabled, or from disabled to enabled. The indicators show the setting status as follows, and the sound bar is turned on.
CONFIGURATION > Enabling/disabling the wireless (Wi-Fi) function Enabling/disabling the wireless (Wi-Fi) function The wireless (Wi-Fi) function can be disabled. Default setting: Enabled 1 2 Turn off the sound bar. Press and hold NET on the remote control for at least five seconds. The wireless (Wi-Fi) function switches from enabled to disabled, or from disabled to enabled. The indicators show the setting status as follows, and the sound bar is turned on.
CONFIGURATION > Setting the dynamic range compression level Setting the dynamic range compression level Compressing the dynamic range of audio signals (the volume difference between the loudest and quietest sounds) makes it easier to listen at a low volume. This setting is applied only when Dolby Digital audio signals are being played. Default setting: No compression 1 2 Turn off the sound bar.
CONFIGURATION > Setting the dynamic range compression level NOTE Press INFO to see the setting of the dynamic range. Related links “Showing the type of audio signal and settings for functions” (p.
CONFIGURATION > Updating the firmware of this product Updating the firmware of this product New firmware may be provided to add features or fix bugs. The firmware can be updated with the Sound Bar Controller app installed on your smartphone. [Search tag]#Q04 Update NOTICE ( ( ( Do not operate the sound bar or unplug the power cord or network cable while updating the firmware.
CONFIGURATION > Setting the HDMI signal format Setting the HDMI signal format When some AV devices are connected to the sound bar, no sound can be heard, the colors of the video are not normal, or other abnormal conditions may occur. Switching between the following modes may improve such conditions. Mode 1 Select this mode for normal use. Mode 2 Select this mode if an error occurs such as abnormal video. Default setting: Mode 1 1 2 Turn off the sound bar.
CONFIGURATION > Connecting a subwoofer manually Connecting a subwoofer manually When using a different subwoofer (SW-X100A) instead of the included one, manually connect it to the sound bar (SR-CUX50A). 1 2 3 Hold down SETUP on the rear of the subwoofer for at least five seconds. Turn on the sound bar. Hold down SETUP on the sound bar’s remote control for at least five seconds. When the connection is established, the CONNECT indicator on the rear of the subwoofer glows.
CONFIGURATION > Initializing the sound bar Initializing the sound bar Reset the settings of the sound bar to the factory presets. 1 2 Turn off the sound bar. While holding down + on the sound bar, press the power button until all indicators flash. The settings of the sound bar are initialized. When initialization is complete, the indicators show the following and the sound bar is turned off.
TROUBLESHOOTING > Check the following first when any problem occurs TROUBLESHOOTING Check the following first when any problem occurs Make sure of the following when the product does not function properly. ( The power cords of all the devices are connected to AC wall outlets securely. ( The product, TV and AV devices are turned on. ( The connectors of each cable are securely inserted into the jacks on each device.
TROUBLESHOOTING > When a problem occurs: Power or overall functionality When a problem occurs: Power or overall functionality The power turns off suddenly ( The Auto Power Standby function turned off the sound bar. Enabling the Auto Power Standby function turns off the sound bar automatically in any of the following situations. No control operations for eight hours No signal input and no control operations for 20 minutes Turn on the sound bar again. The Auto Power Standby function can be disabled.
TROUBLESHOOTING > When a problem occurs: Power or overall functionality The power cannot be turned on ( The protection circuitry has been activated three times consecutively. (The TV indicator on the sound bar flashes red.) To protect the product, the power cannot be turned on. Unplug the power cord from the AC wall outlet and contact the nearest authorized Yamaha dealer or service center. ( The sound bar is in the process of turning on. (Some indicators on the front of the sound bar are flashing.
TROUBLESHOOTING > When a problem occurs: Power or overall functionality No operations can be performed from the sound bar’s controls ( The Child Lock function is enabled (the controls are locked). Disable the Child Lock function (so the controls are unlocked). “Enabling/disabling the Child Lock function” (p.
TROUBLESHOOTING > When a problem occurs: Power or overall functionality All indicators are off although the power is on (the power appears to be off) ( Indicator brightness is set to “Off”. Change the brightness. “Changing the brightness of the indicators” (p.
TROUBLESHOOTING > When a problem occurs: Power or overall functionality The sound bar does not function correctly ( The internal microcomputer is frozen due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage. Press the power button on the sound bar for at least 15 seconds to force the sound bar to turn off, and unplug the power cord of the subwoofer from the AC wall outlet.
TROUBLESHOOTING > When a problem occurs: Power or overall functionality The sound bar turns on by itself ( Another Bluetooth device is being operated nearby. Terminate the Bluetooth connection with the sound bar. “Listening to audio from a Bluetooth® device” (p.
TROUBLESHOOTING > When a problem occurs: Power or overall functionality The sound bar cannot be controlled with the remote control ( The sound bar is out of the operating range. Use the remote control within the operating range. “Part names of the remote control” (p.17) ( ( The battery has run out. Replace the battery with a new one. “Replacing the remote control battery” (p.108) ( ( The remote control sensor of the sound bar is exposed to direct sunlight or strong lighting.
TROUBLESHOOTING > When a problem occurs: Power or overall functionality The sound bar cannot be controlled using the TV’s remote control ( The HDMI Control function is not properly configured. Confirm that the settings are properly configured as follows: The HDMI Control function of the sound bar is enabled. The HDMI Control function is enabled on the TV. In the TV’s HDMI settings, the audio output destination is set to an option other than the TV’s built-in speakers.
TROUBLESHOOTING > When a problem occurs: Power or overall functionality Alexa does not respond when called ( Alexa is not properly configured. Configure it properly with the Sound Bar Controller app. “Controlling the sound bar by voice commands (Amazon Alexa)” (p.63) ( ( The sound bar is not connected to a network. Connect the sound bar to a network. “Network functions” (p.38) “Connecting to a network using a network cable (wired connection)” (p.
TROUBLESHOOTING > When a problem occurs: Power or overall functionality The UPDATE indicator is flashing green ( A new firmware is released. Update the firmware with the Sound Bar Controller app. “Updating the firmware of this product” (p.74) ( ( The product's firmware needs to be updated. (The UPDATE indicator is flashing rapidly.) A firmware update is necessary for some reason, such as when the firmware update failed. Update the firmware with the Sound Bar Controller app.
TROUBLESHOOTING > When a problem occurs: Audio When a problem occurs: Audio No sound ( The input source you are attempting to play back from is not selected. Select the correct input source. “Basic control during playback” (p.43) ( ( The mute function is active. Cancel the mute function. “Basic control during playback” (p.43) ( ( The volume is too low. Turn up the volume. “Basic control during playback” (p.43) ( ( The power cord of the sound bar is not connected securely.
TROUBLESHOOTING > When a problem occurs: Audio No sound is coming from the subwoofer ( The playback source does not contain subwoofer channel signals or low-frequency signals. Try to play content containing subwoofer channel signals, to see if any sound can be heard from the subwoofer. ( The volume of the subwoofer is too low. Turn up the volume of the subwoofer. “Adjusting the volume of the subwoofer” (p.49) ( ( The power cord of the subwoofer is not connected to an AC wall outlet.
TROUBLESHOOTING > When a problem occurs: Audio The volume decreases when the sound bar is turned on ( The Automatic Volume Adjustment function lowered the volume. To prevent unexpected excessive loudness, the sound bar is equipped with the Automatic Volume Adjustment function. If the sound bar was turned off with the volume set high, the volume is automatically adjusted to a safe listening level the next time the sound bar is turned on. Turn up the volume if necessary. “Basic control during playback” (p.
TROUBLESHOOTING > When a problem occurs: Audio No surround effect ( Stereo playback is selected. Select surround playback. “Surround playback” (p.47) ( ( The volume is too low. Turn up the volume. “Basic control during playback” (p.43) ( ( The TV or AV device is set to output 2-channel audio (such as PCM) only. Change the audio output setting on the TV or AV device to output Bitstream audio signals. ( Sound is also heard from the TV’s built-in speakers. Turn the TV’s volume all the way down.
TROUBLESHOOTING > When a problem occurs: Audio Noise is heard ( The sound bar is too close to another digital or high-frequency device. Move those devices away from the sound bar.
TROUBLESHOOTING > When a problem occurs: Bluetooth® When a problem occurs: Bluetooth® The sound bar cannot be connected to a Bluetooth® device ( Bluetooth is not selected as the input source of the sound bar. Select Bluetooth as the input source. “Listening to audio from a Bluetooth® device” (p.52) ( ( The sound bar is too far away from the Bluetooth device. Move the Bluetooth device closer to the sound bar.
TROUBLESHOOTING > When a problem occurs: Bluetooth® No sound can be heard or the sound cuts off intermittently from a Bluetooth® device ( The volume on the Bluetooth device is too low. Raise the volume on the Bluetooth device. ( Playback is not being performed on the Bluetooth device. Perform playback on the Bluetooth device. ( The audio output destination on the Bluetooth device is not set to the sound bar. Select the sound bar as the audio output destination on the Bluetooth device.
TROUBLESHOOTING > When a problem occurs: Network When a problem occurs: Network Network functions cannot be used ( The network information (IP address) is not being properly acquired. Enable the DHCP server function on the router. ( You are trying to connect to an IPv6-type router. The sound bar does not support IPv6 networks. Connect the sound bar to an IPv4 network.
TROUBLESHOOTING > When a problem occurs: Network The sound bar cannot be connected to the Internet via a wireless LAN router (access point) ( The wireless LAN router (access point) is off. Turn on the wireless LAN router (access point). ( The sound bar is too far away from the wireless LAN router (access point). Install the sound bar and wireless LAN router (access point) closer to each other. ( Obstacles are between the sound bar and wireless LAN router (access point).
TROUBLESHOOTING > When a problem occurs: Network A wireless network cannot be not found ( Electromagnetic waves being emitted from devices such as microwave ovens or from other wireless devices are obstructing the wireless communication. Turn off these devices or keep the sound bar and wireless LAN router (access point) away from these devices. Or, connect the sound bar to a 5 GHz-compatible wireless LAN router (access point).
TROUBLESHOOTING > When a problem occurs: Network Audio cannot be played with AirPlay ( An audio file not supported by the sound bar is being played. Play the file on an AirPlay-compatible device, to see if it can be played. If it cannot be played, the file format may not be not supported, or the file may be corrupted.
TROUBLESHOOTING > When a problem occurs: Network The sound bar is not detected on an AirPlay-compatible device ( The sound bar and an AirPlay-compatible device are each connected to different SSIDs. Connect the sound bar and AirPlay-compatible device to the same SSID (try connecting them to the primary SSID).
TROUBLESHOOTING > When a problem occurs: Network Streaming services cannot be played ( The selected streaming service is currently stopped. Try playing the streaming service again later. ( Access to the network is limited by the way the firewall is configured on the router or other network device. Check to see how the firewall is configured on the network device. Also, streaming services can only be played via the port specified by each service. The port number varies depending on the streaming service.
TROUBLESHOOTING > When a problem occurs: Network An audio file on the media server (NAS, etc.) cannot be played ( You are trying to play an audio file in a file format not supported by the sound bar. Only audio files in file formats supported by the sound bar can be played. “Playing audio files using the Sound Bar Controller app” (p.
TROUBLESHOOTING > When a problem occurs: Network Unable to update the firmware via a network ( The condition of the network connection is bad. Try updating the firmware again later, or perform the update using a USB flash drive. For details on how to update the firmware using a USB flash drive, see the following Firmware Update Guide. https://manual.yamaha.
TROUBLESHOOTING > When a problem occurs: App When a problem occurs: App The app cannot detect the sound bar ( An app not supported by the sound bar is being used. This sound bar supports Sound Bar Controller only. Sound Bar Remote, Home Theater Controller, and MusicCast Controller cannot be used. ( The sound bar and smartphone are not connected to the same network. Check the network connection and the router’s settings, and connect the sound bar and smartphone to the same network.
TROUBLESHOOTING > When a problem occurs: App A media server (NAS, etc.) is not detected with the app ( The media sharing setting on the media server is not enabled. The media sharing setting on each media server (NAS, etc.) or media server software must be enabled. See the documentation supplied with each device or software for more information. ( Access to the media server is restricted due to settings such as security software. Check the security software settings of the media server or router.
TROUBLESHOOTING > How to minimize standby power consumption How to minimize standby power consumption Change the settings as follows: ( HDMI Control: Disabled ( Network Standby: Disabled Related links ( ( “Enabling/disabling the HDMI Control function” (p.65) “Enabling/disabling the network standby function” (p.
TROUBLESHOOTING > How to replace the remote control battery How to replace the remote control battery Precautions for remote control batteries Before replacing the remote control battery with a new one, be sure to read the following precautions. Be sure to follow the precautions. WARNING ( ( ( The remote control included with this product contains a coin/button cell battery. Do not ingest the coin/button battery. Keep new and used batteries away from children.
TROUBLESHOOTING > How to replace the remote control battery Replacing the remote control battery ( Before replacing the battery with a new one, be sure to read the following precautions. “Precautions for remote control batteries” (p.107) ( When the battery runs out, the sound bar can no longer be controlled with the remote control. Replace the battery with a new one. 1 While holding down the part labeled PUSH on the back of the remote, slide the cover in the direction of the arrow to remove it.
TROUBLESHOOTING > How to replace the remote control battery 3 Insert a new battery and slide the cover back into its position in the direction of the arrow.
TROUBLESHOOTING > How to reset the sound bar How to reset the sound bar Reset the sound bar by performing the following operations. n Force the sound bar to turn off Press the power button on the sound bar for at least 15 seconds. Unplug the power cord of the subwoofer from the AC wall outlet. Wait for at least 10 seconds, then plug it in again. n To initialize the sound bar Refer to the following explanation and reset the settings of the sound bar to the factory presets. “Initializing the sound bar” (p.
SPECIFICATIONS > Specifications of this product SPECIFICATIONS Specifications of this product The specifications of this product are as follows. n Sound bar Amplifier section Maximum rated output power ( Front L/R 30 W × 2 channels ( Height L/R 30 W × 2 channels ( Subwoofer 30 W × 2 Speaker section Front L/R ( Acoustic suspension type (non-magnetic shielding) Type ( Driver ( Frequency response ( Impedance 4.6 × 6.
SPECIFICATIONS > Specifications of this product Output jacks HDMI 1 (HDMI OUT/TV (eARC)) Other jacks USB 1 (UPDATE ONLY) Network (100BASE-TX/10BASE-T) 1 (NETWORK) Bluetooth Function Sink function (source device to this unit) Bluetooth version Ver 5.0 Supported profiles A2DP Supported codecs Sink function: SBC, MPEG-4 AAC Bluetooth class Bluetooth Class 2 Range (line-of-sight) Approx. 10 m (33 ft) [Models for U.K.
SPECIFICATIONS > Specifications of this product Communication between the sound bar and subwoofer [Models for U.K. and Europe] ( Radio frequency ( Maximum output power (EIRP) 5775 MHz to 5875 MHz 13.8 dBm (24.0 mW) General Power supply ( Models for U.S.A., Canada, Brazil, Taiwan and Mexico AC 100 to 120 V, 50/60 Hz ( Models for U.K., Europe, and other areas AC 100 to 240 V, 50/60 Hz Power consumption 36 W (Rated) Standby power consumption ( ( [Models for U.S.A.
SPECIFICATIONS > Specifications of this product Communication between the sound bar and subwoofer Radio frequency band 5 GHz [Models for U.K. and Europe] ( Radio frequency ( Maximum output power (EIRP) 5775 MHz to 5875 MHz 13.8 dBm (24.0 mW) Transmission range Approx. 10 m ([33 ft] without interference) General Power supply ( Models for U.S.A., Canada, Brazil, Taiwan and Mexico AC 100 to 120 V, 50/60 Hz ( Models for U.K.
SPECIFICATIONS > Supported HDMI video/audio signal formats Supported HDMI video/audio signal formats The following HDMI video/audio signals are supported by this product.
SPECIFICATIONS > Supported HDMI video/audio signal formats NOTE ( ( ( ( ( ( See also the instruction manual supplied with the AV device for details on how to connect it to the sound bar. When playing audio from a copy-protected DVD, video and/or audio signals may not be output depending on the DVD player being used. The sound bar does not support TVs or projectors equipped with HDMI or DVI jacks that are not HDCP compatible.
SPECIFICATIONS > Supported digital audio signal formats Supported digital audio signal formats The following digital audio signals are supported by this product. Audio input signals of the HDMI OUT/TV (eARC) jack The following digital audio signals can be played on this product when they are input from the ARCcompatible HDMI input jack on the TV to the HDMI OUT/TV (eARC) jack on the sound bar: Audio formats Details 2-channel Linear PCM 2 channels, 32 / 44.1 / 48 / 88.2 / 96 / 176.
SPECIFICATIONS > List of indicator displays List of indicator displays The indicators of this product display information primarily in the following ways: n Sound bar’s indicators NOTE This guide shows indicator glowing status as follows: Off Glowing Flashing Power off state Normal playback state a a b c d e f g h i TV Glowing white: Playing audio from the TV b HDMI Glowing white: Playing audio from the HDMI IN jack c BLUETOOTH Glowing blue: Bluetooth device connection established Flash
SPECIFICATIONS > List of indicator displays f BASS EXT Glowing white: Bass Extension is enabled Off: Bass Extension is disabled g ALL Glowing white: ALL mode is enabled Off: ALL mode is disabled h Wi-Fi Glowing white: Wi-Fi connected Flashing white: establishing the Wi-Fi connection Off: Wi-Fi disconnected i UPDATE Flashing green: New firmware is available Off: No new firmware Muted state Invalid operation An error occurred Flashes red Showing the type of audio signal and settings for functions
SPECIFICATIONS > List of indicator displays a Type of audio signal TV glows white, HDMI off: Dolby Audio (Dolby Digital/Dolby Digital Plus/Dolby TrueHD) TV glows red, HDMI off: Dolby Atmos TV glows white, HDMI glows white: AAC TV off, HDMI glows white: Other types of audio signals b Dynamic range compression level Glows blue: Auto Glows white: Compression Off: No compression c Whether the Bluetooth function is enabled or disabled Glows white: enabled Off: disabled d Whether the HDMI Control function
SPECIFICATIONS > List of indicator displays n Information displayed by the indicators of the subwoofer NOTE This guide shows indicator glowing status as follows: Off Glowing Flashing In the process of turning on from powered-off state CONNECT STANDBY Connecting to the sound bar Flashes slowly: searching Flashes rapidly: establishing the connection to the sound bar CONNECT STANDBY Power off state (standby) Connection to the sound bar is established CONNECT STANDBY When in power off state CONNECT
SPECIFICATIONS > List of indicator displays Protection circuitry has been activated CONNECT STANDBY 122
APPENDIX > Trademarks APPENDIX Trademarks The following trademarks are used in this guide. Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012–2022 Dolby Laboratories. All rights reserved.
APPENDIX > Trademarks To control this AirPlay 2-enabled speaker, iOS 11.4 or later is required. Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple, AirPlay, Apple TV, Apple Watch, iPad, iPad Air, iPad Pro, iPhone, Lightning, and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries and regions.
APPENDIX > List of support centers List of support centers If the trouble still cannot be solved, please contact us for product support as shown below. For customers within Japan ( Please contact the store where you purchased this product, or the Product Support Center as listed in the “Quick Start Guide” included with this product. For customers outside of Japan ( Please contact your nearest authorized Yamaha dealer or service center. https://manual.yamaha.
Layout Folder: YMH_PDF_Manual_A5_AV Stylesheet Name: 01_YMH_PDF_Manual_A5_AV_En-Multi Stylesheet Version: 2022.12.12 Yamaha Global Site https://www.yamaha.com/ Yamaha Downloads https://download.yamaha.
