Owner’s Manual
Table Of Contents
- CONTENTS
- BEFORE USING THE UNIT
- FEATURES
- PREPARATIONS
- Connecting speakers
- Connecting a TV
- Connecting playback devices
- Connecting the FM/AM antennas
- Preparing for connecting to a network
- Plugging in the power cable
- Selecting the on-screen menu language
- Configuring the necessary speaker settings
- Setting MusicCast
- ENJOYING SOUND
- Enjoying sound field effects
- Select your favorite sound mode
- Enjoying 3D sound fields (CINEMA DSP 3D)
- Enjoying sound field effects optimized for the type of content
- Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)
- Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT)
- Enjoying surround sound with headphones (SILENT CINEMA)
- Enjoying unprocessed playback
- Enjoying enhanced bass sound
- Enjoying enhanced compressed music
- Enjoying Dolby Atmos® and DTS:X™
- Enjoying music in multiple rooms
- Enjoying sound field effects
- PLAYBACK
- Basic playback procedure
- Listening to FM/AM radio
- Playing back music stored on a Bluetooth® device
- Playing back music with AirPlay
- Playing back music stored on a USB storage device
- Playing back music stored on media servers (PCs/NAS)
- Listening to Internet radio
- Listening to music streaming services
- Useful playback functions
- Configuring playback settings for different playback sources (Option menu)
- Basic operation of the Option menu
- Option menu items
- Switching the input source
- Adjusting the tone of the audio output
- Configuring DSP/Surround
- Correcting volume differences during playback
- Enabling Lipsync adjustment
- Checking information about the video/audio signals
- Combining audio of another input source with video of the current input source
- Selecting a video source to be output with the selected audio source
- Switching between stereo and monaural for FM radio reception
- Setting presets for radio stations
- Receiving traffic information automatically
- Configuring the shuffle setting
- Configuring the repeat setting
- Enabling volume control via AirPlay
- Adding an Internet radio station to the “Favorites” folder
- Removing an Internet radio station from the “Favorites” folder
- CONFIGURATIONS
- Configuring various functions (Setup menu)
- Configuring the speaker settings
- Setting your speaker system
- Setting the use of a subwoofer
- Setting the size of the front speakers
- Setting the use of a center speaker and its size
- Setting the use of surround speakers and their size
- Setting the use of surround back speakers and their size
- Setting the use of presence speakers and their size
- Setting the layout of the presence speakers
- Setting the crossover frequency of the low-frequency components
- Setting the phase of the subwoofer
- Setting the use of Extra Bass
- Setting the use of Virtual CINEMA FRONT
- Setting the distance between each speaker and the listening position
- Adjusting the volume of each speaker
- Setting the equalizer
- Outputting test tones
- Configuring the HDMI settings
- Setting the use of HDMI Control
- Setting the output of HDMI audio from the TV speaker
- Setting the use of HDMI Standby Through
- Setting the use of 4K upscaling of the HDMI video signal
- Setting the version of HDCP used on the HDMI input jacks
- Setting the audio jack used for TV audio input
- Linking the standby modes of the unit and the TV
- Setting the use of ARC
- Setting the use of SCENE link playback
- Configuring the sound settings
- Setting the use of Center Spread
- Adjusting the center localization (broadening effect) of the front sound field
- Setting the use of Monaural Mix
- Setting the adjustment method of the Lipsync function
- Adjusting the delay of the Lipsync function
- Adjusting the volume of dialogue sound
- Adjusting the volume of dialogue sound during DTS:X™ playback
- Adjusting the perceived height of dialogue sound
- Setting the scale of the volume display
- Setting the dynamic range adjustment method
- Setting the limit value of the volume
- Setting the initial volume for when the unit is turned on
- Adjusting the volume for Zone B in conjunction with the volume for Zone A
- Configuring the power supply settings
- Configuring the function settings
- Automatically changing the input source names displayed on the front display
- Manually changing the input source names displayed on the front display
- Setting input sources to be skipped when operating the INPUT key
- Adjusting the brightness of the front display
- Preventing accidental changes to the settings
- Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control
- Configuring the network settings
- Checking the network information of the unit
- Setting the network connection method (Wired/Wireless)
- Setting the network parameters automatically (DHCP)
- Setting the network parameters manually
- Setting the MAC address filter
- Setting the use of a Digital Media Controller
- Setting the use of the Network Standby function
- Setting the network name of the unit
- Setting the power interlock from the unit to MusicCast compatible devices
- Updating the firmware via the network
- Configuring the Bluetooth® settings
- Configuring the language settings
- Configuring the advanced settings (ADVANCED SETUP menu)
- Basic operation of the ADVANCED SETUP menu
- ADVANCED SETUP menu items
- Changing the speaker impedance setting (SP IMP.)
- Selecting the remote control ID (REMOTE ID)
- Changing the FM/AM tuning frequency setting (TU)
- Switching the video signal type (TV FORMAT)
- Selecting the HDMI 4K signal format (4K MODE)
- Setting DTS Format Notification (DTS MODE)
- Backuping and restoring all the settings (BKUP/RSTR)
- Restoring the default settings (INIT)
- Updating the firmware (UPDATE)
- Checking the firmware version (VERSION)
- TROUBLESHOOTING
- When any problem appears
- If trouble occurs, first check the following:
- Power, system, or remote control trouble
- The power does not turn on
- The power does not turn on in synchronization with the TV
- The power does not turn off
- The power turns off (standby mode) immediately
- The unit enters standby mode automatically
- The unit is not reacting
- The unit cannot be controlled using the remote control
- Cannot select the desired input source even if “INPUT” is pressed
- The RED/GREEN/YELLOW/BLUE keys of the remote control do not operate
- Audio trouble
- No sound
- The volume cannot be increased
- No sound is coming from a specific speaker
- No sound is coming from the surround back speaker
- No sound is coming from the subwoofer
- No sound from the playback device connected to the unit with HDMI
- No sound from the TV when HDMI Control is used
- Only the front speakers work on multichannel audio
- Noise/hum is heard
- The sound is distorted
- Video trouble
- FM/AM radio trouble
- USB trouble
- Network trouble
- The network feature does not function
- The unit cannot connect to the Internet via a wireless router (access point)
- Wireless network is not found
- The unit does not detect the media server (PC/NAS)
- The files in the media server (PC/NAS) cannot be viewed or played back
- The Internet radio cannot be played
- The iPhone does not recognize the unit when using AirPlay
- The application for mobile devices does not detect the unit
- Firmware update via the network is failed
- Bluetooth® trouble
- Error indications on the front display
- When any problem appears
- APPENDIX
- Updating the unit’s firmware via the network
- Connecting to a network wirelessly
- Selecting a wireless network connection method
- Setting up a wireless connection using the WPS button
- Setting up a wireless connection using an iOS device
- Setting up a wireless connection by selecting from the list of available access points
- Setting up a wireless connection manually
- Setting up a wireless connection by using the WPS PIN code
- Input/output jacks and cables
- Using presence speakers
- Glossary
- Supported devices and file formats
- Video signal flow
- Additional information on HDMI
- Trademarks
- Specifications
- Default settings
Maximum Input Signal
• AV 2 etc. (1 kHz, 0.5% THD, Effect On) 2.3 V
Output Level / Output Impedance
• SUBWOOFER
1 V/1.2 kΩ
Headphone Jack Rated Output / Impedance
• AV 2 etc. (1 kHz, 50 mV, 8 Ω) 100 mV/470 Ω
Frequency Response
• AV 2 etc. to Front (10 Hz to 100 kHz) +0/-3 dB
Signal to Noise Ratio (IHF-A Network)
• AV 2 etc. (DIRECT) (Input 1 kΩ Shorted, Speaker Out)
110 dB or more
Residual Noise (IHF-A Network)
• Front L/R (Speaker Out) 150 μV or less
Channel Separation
• AV 2 etc. (Input 1 kΩ Shorted, 1 kHz/10 kHz)
70 dB/50 dB or more
Volume Control
• Range MUTE, -80 dB to +16.5 dB
• Step 0.5 dB
Tone Control Characteristics
• Bass Boost/Cut ±6 dB/0.5 dB Step at 50 Hz
• Bass Turnover 350 Hz
• Treble Boost/Cut ±6 dB/0.5 dB Step at 20 kHz
• Treble Turnover 3.5 kHz
Filter Characteristics
(fc=40/60/80/90/100/110/120/160/200 Hz)
• H.P.F. (Front, Center, Surround, Surround Back) 12 dB/oct.
• L.P.F. (Subwoofer) 24 dB/oct.
Video Section
Video Signal Type
• [U.S.A., Canada, Korea, Taiwan, Brazil and General models] NTSC
• [Other models] PAL
Video Signal Level
• Composite
1 Vp-p/75 Ω
Video Maximum Input Level
1.5 Vp-p or more
Video Signal to Noise Ratio
50 dB or more
FM Section
Tuning Range
• [U.S.A. and Canada models] 87.5 MHz to 107.9 MHz
• [Asia, Taiwan, Brazil, General, and Central
and South America models]
87.5/87.50 MHz to 108.0/108.00 MHz
• [U.K. and Europe models] 87.50 MHz to 108.00 MHz
• [Other models] 87.50 MHz to 108.00 MHz
50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)
• Monaural 3 μV (20.8 dBf)
Signal to Noise Ratio (IHF)
• Monaural 65 dB
• Stereo 64 dB
Harmonic Distortion (IHF, 1 kHz)
• Monaural 0.5%
• Stereo 0.6%
Antenna Input
75 Ω unbalanced
AM section
Tuning Range
• [U.S.A. and Canada models] 530 kHz to 1710 kHz
• [Asia, Taiwan, Brazil, General, and Central and South
America models]
530/531 kHz to 1710/1611 kHz
• [U.K. and Europe models] 531 kHz to 1611 kHz
• [Other models] 531 kHz to 1611 kHz
En
143