Owner’s Manual

Table Of Contents

Setting the use of Virtual CINEMA FRONT

Selects whether to use Virtual CINEMA FRONT.

Note

Select “On” only when utilizing the Virtual CINEMA FRONT configuration. For details, see the following:

▪ “Using Virtual CINEMA FRONT” (p.23)

Setup menu

“Speaker” > “Configuration” > “Virtual CINEMA FRONT”

Settings

Off Disables Virtual CINEMA FRONT

On Enables Virtual CINEMA FRONT

Note

This setting is not available when “Surround” is set to “None”. For details on “Surround” in the “Setup” menu,

see the following:

▪ “Setting the use of surround speakers and their size” (p.83)

Setting the distance between each speaker and the

listening position

Sets the distance between each speaker and the listening position so that sounds from

the speakers reach the listening position at the same time.

Setup menu

“Speaker” > “Distance”

Choices

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,

Presence L

, Presence R, Subwoofer

Setting range

0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments

Note

Select the unit of distance from “Meter” or “Feet” in “Unit”.

Adjusting the volume of each speaker

Adjusts the volume of each speaker to suit your listening position.

Setup menu

“Speaker” > “Level”

Choices

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,

Presence L

Presence R, Subwoofer

Setting range

-10.0 dB to +10.0 dB (0.5 dB increments)

Note

Test tone output helps you to adjust the speaker balance while confirming its effect. For details, see the

following:

▪ “Outputting test tones” (p.87)