Owner's Manual

Adjusting the height volume balance using the
presence speakers for “7ch Stereo”
Adjusts the height volume balance using the presence speakers. Higher to enhance
the upside, and lower to enhance the downside. This setting is effective when “7ch
Stereo” is selected.
Setup menu
“
Sound” > “7ch Stereo” > “Height Balance”
Setting range
0 to 10
NOTE
The presence speakers do not produce sounds when “Height Balance” is set to “0”.
Setting the use of Monaural Mix for “7ch Stereo”
Enables/disables monaural sound output. This setting is effective when “7ch Stereo” is
selected.
Setup menu
“Sound” > “7ch Stereo” > “Monaural Mix”
Settings
Off Disables monaural sound output.
On Enables monaural sound output.
Setting the dynamic range adjustment method
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Setup menu
“Sound” > “Dynamic Range”
Settings
Maximum Produces audio without adjusting the dynamic range.
Standard Optimizes the dynamic range for regular home use.
Minimum/Auto
Sets the dynamic range for clear sound even at night or at low volumes.
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
Setting the limit value of the volume
Sets the limit value of the volume adjusted by using such as VOLUME keys on the
remote control.
Setup menu
“Sound” > “Volume” > “Max Volume”
Setting range
-60.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB [20.5 to 95.5 (5.0 increments),
97.0]
NOTE
For details on the scale of the volume display (dB unit or numeric value), see the following:
▪ “Setting the scale of the volume display” (p.146)
En
124