Owner's Manual

Menu Item Function Page
Sound
Surround Decoder
Decode Type
Selects a surround decoder to be used in combination with the selected sound program. p.121
Center Spread
Selects whether to spread the center channel signals to left and right when 2-channel source is played. p.122
Center Image
Adjusts the center localization (broadening effect) of the front sound field. p.122
7ch Stereo
Level
Adjusts the entire volume for “7ch Stereo”. p.122
Front / Rear Balance
Adjusts the front and rear volume balance for “7ch Stereo”. p.122
Left / Right Balance
Adjusts the left and right volume balance for “7ch Stereo”. p.122
Height Balance
Adjusts the height volume balance using the presence speakers for “7ch Stereo”. p.123
Monaural Mix
Enables/disables monaural sound output for “7ch Stereo”. p.123
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. p.123
Volume
Max Volume
Sets the limit value of the volume. p.123
Initial Volume
Sets the initial volume for when this receiver is turned on. p.124
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP 3D effect level when the volume is adjusted. p.124
Virtual Speaker VSBS
Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. p.124
Scene
Scene Setting
Selects items to be included as the scene assignments. p.125
Scene Rename
Renames the scene name displayed on the front display or TV screen. p.126
Video/HDMI
Information
Displays information about the current video signal and the TVs connected to the HDMI OUT jacks. p.127
Video Mode
Video Mode
Enables/disables the video signal processing. p.127
Resolution
Selects a resolution to output HDMI video signals. p.127
Aspect
Selects an aspect ratio to output HDMI video signals. p.128
HDMI Control
HDMI Control
Enables/disables HDMI Control. p.128
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input. p.128
ARC
Enables/disables ARC. p.128
Standby Sync
Selects whether to use HDMI control to link the standby behavior of the TV and the unit. p.129
HDMI Audio Output
Enables/disables the audio output from a TV. p.129
HDCP Version
Selects the version of HDCP used on the HDMI input jacks. p.129
HDMI Standby Through
Selects whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. p.129
En
105