Owner's Manual

Default settings
Default settings of the Option
menu
The default settings of the “Option” menu are as
follows.
Tone Control
Treble, Bass
Bypass (0.0 dB)
* When both “Treble” and “Bass” are
0.0 dB, “
Bypass” appears.
YPAO Volume
• YPAO Volume Off
• Adaptive DRC Off
Dialogue
• Dialogue Level 0
• DTS Dialogue Control 0
• Dialogue Lift 0
(This setting is available only when
one of the sound programs (except
for 2ch Stereo and 7ch Stereo) is
selected when presence speakers
are used, or Virtual Presence
Speaker (VPS) is working.)
Lipsync 0 ms
Enhancer
– TUNER, (network sources), AirPlay,
SERVER, NET RADIO, Bluetooth, USB
On
–
Others Off
Volume Trim
• Input Trim 0.0 dB
• Subwoofer Trim 0.0 dB
Extra Bass Off
Video Processing
• Video Mode Direct
Video Out Off
Shuffle / Repeat
• Shuffle Off
• Repeat Off
FM Mode Stereo
Default settings of the Setup
menu
The default settings of the “Setup” menu are as follows.
Speaker
Power Amp Assign Basic
Configuration
• Front Small
• Center Small
• Surround Small
– Layout Rear
• Surround Back Small
• Front Presence Small
– Layout Front Height
• Crossover 80 Hz
• Subwoofer Use
– Phase Normal
Distance 3.00 m (10.0 ft)
Level 0.0 dB
Parametric EQ Through
Test Tone Off
YPAO Result
• Result -
Sound
Information -
Lipsync
• Delay Enable Enable
• Auto/Manual Select Auto
• Adjustment 0 ms
DSP Parameter -
Surround Decoder
• Decode Type Auto
• Center Spread Off
• Center Image 0.3
7ch Stereo
• Level 0
• Front / Rear Balance 0
• Left / Right Balance 0
• Height Balance 5
• Monaural Mix Off
Dynamic Range Maximum
Volume
• Max Volume +16.5 dB
• Initial Volume Off
Adaptive DSP Level On
Virtual Speaker
• VSBS On
En
194