Owner's Manual

Checking the YPAO measurement results
You can check the YPAO measurement results.
1
After the measurement, use the cursor keys to select
“Measurement result” and press ENTER.
Note
You can also check the previous measurement results in the “Setup” menu. For details, see the
following:
▪ “Reloading the previous YPAO adjustments” (p.114)
The following screen appears.
a
b
1
Measurement result items
2
Measurement result details
2
Use the cursor keys to select an item.
Wiring
Polarity of each speaker
Reverse: The speaker cable may be connected with the reverse
polarity (+/-).
Size
Size of each speaker (cross-over frequency of the subwoofer)
Large: The speaker can reproduce low-frequency signals
effectively.
Small: The speaker cannot reproduce low-frequency signals
effectively.
Distance
Distance from the listening position to each speaker
Level
Output level adjustment for each speaker
3
To finish checking the results and return to the previous screen,
press RETURN.
En
44