Owner's Manual

Reloading the previous YPAO adjustments
When the speaker settings you have configured manually are not suitable, follow the
procedure below to discard the manual settings and reload the previous YPAO
adjustments.
1
Press SETUP.
2
Use the cursor keys to select “Speaker” and press ENTER.
3
Use the cursor keys to select “YPAO Result” and press ENTER.
4
Use the cursor keys to select “Setup Reload” and press ENTER.
5
Press SETUP.
This completes the settings.
Note
For details, see the following:
▪ “Reloading the previous YPAO adjustments” (p.114)
En
45