Owner`s manual

10 En
DAB (Digital Audio Broadcasting) uses digital signals for clearer sound and more stable reception compared to
analog signals.
This unit can also receive DAB+ (an upgraded version of DAB) that allows for more stations using MPEG-4
audio codec (AAC+), which has a more efficient transmission method.
Before tuning into DAB stations, an initial scan must be performed. The initial scan starts automatically when
you select DAB as the input source for the first time.
LISTENING TO DAB STATIONS
Preparing the DAB tuning
1 Set SOURCE to DAB.
y
You can also perform the initial scan manually by
INIT SCAN (☞ P. 19, 20).
2 The initial scan starts.
“Scanning” and the percentage of the progress
of scan appear on the front panel display.
3 Scan is completed.
The number of receivable DAB stations
appears on the front panel display for a while,
then the unit airs the first station as stored in
station order.
This unit can receive Band III (174 - 240 MHz) only.
SOURCE
1
2
3
Note
Tuning DAB stations
1 Set SOURCE to DAB.
2 Select a DAB station with TUNING.
SOURCE
TUNING
1 2
Remote control