U DESKTOP AUDIO SYSTEM SYSTEME AUDIO DESKTOP TSX-140 OWNER’S MANUAL MODE D’EMPLOI MANUAL DE INSTRUCCIONES
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
English FCC INFORMATION (for US customers) 1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this unit in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture and cold. For proper ventilation, allow the following minimum clearances.
English CONTENTS SHUFFLE/REPEAT PLAYBACK ............. 12 USING SLEEP FUNCTION...................... 12 TONE CONTROL..................................... 12 TROUBLESHOOTING ............................. 13 NOTES ON DISCS AND USB DEVICES ................................................................. 16 SPECIFICATIONS ................................... 17 Español X Features – iPod/iPhone, CD, USB device, radio and external device using AUX are playable.
PREPARATION NAMES OF PARTS AND THEIR FUNCTIONS X Top panel Set your iPod in the iPod dock. y An iPod is charged when set in the iPod dock. During power save mode, the iPod is not charged. Notes Dock Adaptor • Be sure to use a dock adaptor that is compatible with your iPod. If you do not use the adaptor or the adopter is not compatible, the connection could be loose or poor, which could cause damage to the connector. • If an iPod in protective case is connected by force, the connector may be damaged.
NAMES OF PARTS AND THEIR FUNCTIONS English X Front panel 1 Front panel display: Displays the clock and various information. 6 SOURCE: Change sources. 2 Preset indicator: Shows preset radio station number (☞ P. 8) 8 3 PLAY indicator Shuffle indicator Repeat indicator : Shows playback status. (☞ P. 10, 12) 7 VOLUME: Volume control knob (During playing data CD/USB): Change folders (During receiving radios): Select the preset radio station. (☞ P. 8) 9 Headphones jack: Connect headphones.
NAMES OF PARTS AND THEIR FUNCTIONS X Rear panel (Connecting antenna) Notes • The antenna should be stretched out. • If you use an outdoor antenna instead of the supplied antenna, reception will be better. • If radio reception is poor, change the height, direction, or placement of the antenna. 5 USB FOR SYNC.: Connect to PC. (☞ P. 6) 1 FM antenna terminal: Connect the supplied indoor FM antenna. 2 AM antenna terminal: Connect the supplied AM loop antenna.
ADJUSTING THE CLOCK English X Remote control iPod control buttons 1 Infrared signal transmitter 2 7 : System on/off 3 Source buttons: Change sources. 4 FOLDER (during playback): When source contains folders, change played folder. PRESET (during receiving radio): Select the preset radio station (☞ P. 8) 5 (Shuffle), 6 : Stop playback. (Repeat) (☞ P. 12) 8 , (during playback): Skip and search backward/forward TUNING (during receiving radio): Tuning radio (☞ P.
OPERATION LISTENING TO iPod Listening to iPod For details on compatible iPod models, refer to “SPECIFICATIONS” (☞ P. 17). 1 1 Set your iPod in the iPod dock. 2 2 Set SOURCE to iPod. 3 Play the iPod. Playback operations are available with the remote control, iPod and this unit. y • You can remove the iPod whenever you want. • When music/video in the iPod is played back, this unit turns the system on automatically and plays back the iPod even if the unit is system off.
English LISTENING TO CD AND USB DEVICE X Listening to CD 1 Set SOURCE to CD. 1 2 2 Insert a CD. Playback starts automatically. Playback operations are available with the remote control and this unit. Note Insert the CD with the label side facing toward the front of the unit. Front panel X Listening to USB device 1 1 Set SOURCE to USB. 2 2 Connect a USB device. Playback starts automatically. Playback operations are available with the remote control and this unit.
LISTENING TO RADIO STATIONS X Tuning radio stations 1 Set SOURCE to FM/AM. 1 2 2 For automatic tuning, press and hold TUNING. For manual tuning, press TUNING repeatedly. Top Panel Front panel Note If you tune to a station manually, the sound is monaural. X Presetting radio stations You can store your favorite 5 radio stations with the preset function. 1 2 3 4 1 Tune into a favorite radio station. 2 Press MEMORY. 3 Select the PRESET number you want to store to.
English USING ALARM FUNCTION Features of IntelliAlarm This unit can play back your favorite music and/or beep sound at the set time. The alarm function (IntelliAlarm) has following features. • This unit has 3 alarm types combining music and beep sound: SOURCE+BEEP Selected audio source and the beep sound are played at the set time. Source playback begins to fade in 3 minutes before the set time and the volume gradually increases to the set volume. Then, at the set time, the beep sound is activated.
USING ALARM FUNCTION 3 3 Set ALARM TYPE. 4 (As required) Select from SOURCE+BEEP, SOURCE or BEEP. For the details on alarm type, Refer to “Features of IntelliAlarm (☞ P. 9)”. 4 Select SOURCE (as required). Rear panel Front panel When you select SOURCE+BEEP or SOURCE, select source. A source other than AUX can be selected. 5 Select a track, folder or radio station (as required). 5 When the source is CD/USB/FM/AM, select a track, folder or radio station for alarm with / .
USING ALARM FUNCTION Switch on/off the alarm function. y When the alarm is on, the alarm indicator ( ) lights up and alarm time is displayed for a while. Top panel Operations during playing back alarm sound At the set time, alarm sound plays back. During playback, operations below are available. Note If source cannot be played back at the alarm time (ex. iPod is not set), beep sound is played back. X Using the snooze function Press SNOOZE/SLEEP. The alarm sound stops and resumes after 5 minutes.
SHUFFLE/REPEAT PLAYBACK Shuffle playback Repeat playback Press repeatedly Press repeatedly Remote control Remote control Shuffle indicator lights up as follows. Repeat indicator lights up as follows. (folder shuffle) (all shuffle) (No display: Off) Back to the top. (folder repeat) (all repeat) (single repeat) (No display: Off) Back to the top. y • When source contains folders, folder shuffle/repeat can be selected.
ADDITIONAL INFORMATION English TROUBLESHOOTING In case of a problem with the unit, check the following list first. If you cannot solve your problem with the suggested solutions or if your problem is not listed below, turn off and unplug the unit, and consult the nearest authorized Yamaha dealer or service center. General Problem The speakers make no sound. Cause The volume may be set to the minimum level. Solution Adjust the volume level. The source may be incorrect. Select the correct source.
TROUBLESHOOTING iPod Problem No sound Cause The iPod is not set in the iPod dock firmly. Solution Set the iPod firmly. Earphones are connected. Remove the earphones. The iPod software version has not been updated. Download the latest iTunes software to update the iPod software version to the latest. The iPod does not charge up. The iPod is set in the iPod dock improperly. The system is set to power save mode (☞ P. 2). Remove the iPod from the unit, and then set it in the iPod dock again (☞ P. 2).
TROUBLESHOOTING English USB device playback Problem MP3/WMA file in the USB device does not play. Cause The USB device is not recognized. Solution Turn off the system and reconnect the USB device to the unit. Connect an AC adapter if supplied with the device. If the solutions above do not resolve the problem, the USB device is not playable on the unit. Flashing USB indicator twice An incompatible USB device is connected to the unit. is repeated 3 times after connecting a USB device.
NOTES ON DISCS AND USB DEVICES Disc information This unit is designed for use with audio CD, CD-R*, and CD-RW* with the logos followings. • If a disc becomes dirty, wipe it with a clean, dry cloth from the center out to the edge. Do not use record cleaner or paint thinner. • To avoid malfunction, do not use a commercially available lens cleaner. USB device information * ISO 9660 y This unit can play back discs bearing any of the logo marks above.
English SPECIFICATIONS X PLAYER SECTION LASER SAFETY iPod (Digital connection) This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. • Made for ............. iPod touch(1st, 2nd, and 3rd generation) iPod classic iPod nano (2nd, 3rd, 4th, and 5th generation) iPhone 4 iPhone 3GS iPhone 3G iPhone CD • Media........................................................... CD, CD-R/RW • Audio format ......................
© 2010 Yamaha Corporation Printed in China WV77940
