Owner`s manual

7 En
This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth device
(smartphone, digital audio player, etc.). Please also refer to the owner’s manual of your Bluetooth device.
This unit can be paired with up to four connecting devices. When pairing with the fifth device has succeeded, pairing data for
the device with the oldest connection date will be deleted.
If this unit is connected via Bluetooth to another device, press and hold SOURCE to disconnect the Bluetooth connection
before you perform the pairing operation.
Bluetooth
Bluetooth is a technology for wireless communication between devices within an area of about 10 meters (33 ft) employing
the 2.4 GHz frequency band, a band which can be used without a license.
Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license agreement.
Handling Bluetooth communications
The 2.4 GHz band used by Bluetooth compatible devices is a radio band shared by many types of equipment. While
Bluetooth compatible devices use a technology minimizing the influence of other components using the same radio band,
such influence may reduce the speed or distance of communications and in some cases interrupt communications.
The speed of signal transfer and the distance at which communication is possible differs according to the distance between
the communicating devices, the presence of obstacles, radio wave conditions and the type of equipment.
Yamaha does not guarantee all wireless connections between this unit and devices compatible with Bluetooth function.
LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE
Installation
Install in a stable place, being careful of
the following points:
Do not place on top of steel or other
metal plates.
Do not cover with a cloth, etc.
Install in the same room as the device
with which signals are to be exchanged
(Bluetooth profile A2DP compatible
smartphone, digital audio player, etc.)
within a direct line-of-sight distance of
10 m (33 ft).
Make sure there are no obstacles
between this unit and the Bluetooth
device.
Within 10 m (33 ft)
Pairing this unit with your Bluetooth device
y What is pairing?
Pairing is an operation that registers the communicating device (subsequently called “the connecting
device”) with this unit. You will need to perform the pairing operation the first time you use your Bluetooth
device with this unit, or if the pairing settings have been deleted. Once pairing has been completed,
subsequent reconnection will be easy even after the Bluetooth connection is disconnected. If pairing is not
successful, refer to the item “Bluetooth” in “TROUBLESHOOTING” ( page 12).
Note