User Manual

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

13 En

Once pairing has been completed, connecting a Bluetooth will be easy the next time.

 Connecting from this unit

 Connecting from the connecting device

1 In the Bluetooth settings of the connecting device, turn Bluetooth on.

2 From the Bluetooth connection list of the connecting device, choose this unit (TSX-B141

Yamaha).

The Bluetooth connection will be established, and the Bluetooth indicator on the front panel display of this

unit will light.

 Connecting with the NFC function

When using an already-paired smartphone with the NFC function, holding it over the NFC mark establishes a

Bluetooth connection.

Bluetooth connections cannot be established from the connecting device when this unit is in Eco Standby

mode. Turn the unit on.

If any of the following operations are performed while a Bluetooth connection is established, the Bluetooth

connection will be disconnected.

• Press the (Bluetooth) button on the unit. (Or hold down on the remote control.)

• Set the unit to standby mode.

• Turn off the Bluetooth setting of the connecting device.

• Hold the smartphone with the NFC function over the NFC mark during Bluetooth connection.

Connecting an already-paired device via Bluetooth

Follow procedure or below to connect the

device.

Set SOURCE to BLUETOOTH.

Press the (Bluetooth) button on the right

side of the front control panel.

The Bluetooth indicator will blink on the front panel

display; this unit will search for the connecting

device that was most recently connected via

Bluetooth, and will then establish a connection (You

must first turn on the Bluetooth setting of the

connecting device).

When the Bluetooth connection has been

established, the Bluetooth indicator will light.

Disconnecting a Bluetooth connection

Front panel

Bluetooth indicator

SOURCE

( Bluetooth)

button

A B

Note