User Manual

TROUBLESHOOTING
23 En
En
CD playback
Problem Cause Solution
Disc cannot be inserted.
The unit is set to Eco Standby mode. Press to cancel Eco Standby mode
(☞ P. 4).
A disc is already inserted. Press to eject the disc.
Some button operations do not
work.
The disc loaded into the unit may not be
compatible.
Use a disc supported by the unit (☞ P. 26).
Playback does not start after
pressing (playback stops
immediately).
The disc may be dirty. Wipe the disc clean.
The disc loaded into the unit may not be
compatible.
Use a disc supported by the unit (☞ P. 26).
If the unit was moved from a cold to
warm place, condensation may have
formed on the disc reading lens.
Wait for an hour or two until the unit
adjusts to the room temperature, and try
again.
The CD indicator flashes twice,
and repeated 3 times, and the
disc is ejected.
The disc loaded into the unit may not be
compatible.
Use a disc supported by the unit (☞ P. 26).
The disc may be dirty. Wipe the disc clean.
The disc does not contain playable files. Use a disc contains playable files
(☞ P. 26, 27).
The disc is loaded back to front. Insert a disc facing the label side to near
side.
“Err” is displayed in the front
panel display after loading a
disc.
An error occurs in the unit. Eject the disc with .
USB device playback
Problem Cause Solution
MP3/WMA file in the USB
device does not play.
The USB device is not recognized. Set the unit to standby mode and disconnect
the USB device. Then, turn the unit on and
reconnect the USB device.
Connect an AC adaptor if supplied with the
device.
The USB indicator flashes twice,
and repeated 3 times, after
connecting a USB device.
An incompatible USB device is
connected to the unit.
Set the unit to standby mode and reconnect
the USB device to the unit. If it does not
resolve the problem, the USB device is not
playable on the unit.
The USB device does not contain
playable files.
Use a USB device contains playable files
(☞ P. 26, 27).