User Manual

USING ALARM FUNCTION
20 En
 Setting Weekly Alarm on the unit
Once you have set Weekly Alarm by DTA CONTROLLER, you can select the Weekly Alarm mode in the
alarm mode select display of this unit.
1 Press SET.
The alarm indicator ( ) will flash and the
alarm mode select display will appear.
2 Select the alarm mode.
Rotate PRESET to select the alarm mode, and
press SET to confirm it.
If you have chosen Weekly Alarm mode, this
completes the alarm setting. The alarm indicator
( ) and the Weekly Alarm indicator ( )
will light up.
The Weekly Alarm mode cannot be selected when all the
days of the Weekly Alarm setting are turned off. Turn on
any day of the Weekly Alarm setting.
Top panel
12
,
SET
Front panel
2
PRESET
1d (One Day Alarm mode):
An alarm that sounds only once at the specified time.
7d (Weekly Alarm mode):
An alarm whose time can be specified for each day of
the week (settable only using “DTA CONTROLLER”).
Alarm indicator
Weekly Alarm indicator
Alarm indicator
Note