User Manual

NAMES OF PARTS AND THEIR FUNCTIONS
5 En
En
1 Front panel display
Displays the clock and various information.
2 Illumination sensor
Measures surrounding illuminance. Do not cover
this sensor.
3 Source indicator
Shows the selected source.
4 SOURCE
Changes sources.
5 VOLUME
Controls volume.
6 PLAY indicator
Shuffle indicator
Repeat indicator
Shows playback status (☞ P. 9).
7 Preset indicator
Shows preset radio station number (☞ P. 14).
8 MEMORY
Memorizes radio stations (☞ P. 14).
9 EQ
Controls tone (☞ P. 15).
0 (Bluetooth)
Connect/disconnect Bluetooth devices (☞ P. 13).
A HEADPHONES
Connect headphones.
B PRESET
• During playing data CD/USB: Changes folders
(☞ P. 9).
• During receiving radios: Selects the preset radio
station (☞ P. 14).
Front panel
BLUETOOTH
 Auto Standby
• With the Auto Standby function, the unit behaves as described below when the unit is turned on (default
setting):
– This unit enters standby mode when playback of CD/USB is paused, when no signal is input from the
tuner or a connected device, or when playback continues at quite a low volume for a certain period of
time (about 20 minutes).
– This unit enters standby mode when no operation is performed for more than 8 hours.
• Activating/Deactivating Auto Standby
1 Plug in the unit while pressing and holding .
2 Keep holding .
The Auto Standby status changes, the , TUNING, SOURCE, VOLUME, and PRESET LEDs blink,
and the message is displayed on the front panel display.
– When activating Auto Standby: On
– When deactivating Auto Standby: Off
y
(U.S.A. and Canada models) When the clock is set to the factory setting and no time has been set, this operation is not
available. Set the time before the operation (☞ P. 7).