manual

2 En
■ Top panel
NAMES OF PARTS AND THEIR FUNCTIONS
G Display
H Indicators
(Alarm): Lights when the alarm
function is on (☞ page 4).
RADIO: Lights when the radio is selected
as an input source (☞ page 6).
AUX: Lights when AUX is selected as an
input source (☞ page 10).
(Bluetooth):Lights when ( ) Bluetooth
is selected as an input
source or during Bluetooth
pairing/connection
(☞ page 7, 9).
J
Press to turn on the system or enter standby mode.
Eco Standby mode
• This can reduce power consumption. Press and hold for
more than 3 seconds to set the system to power saving mode.
All the indicators and display turn off, and Bluetooth operation,
audio playback, input via buttons except are disabled. To
cancel Eco Standby mode, press .
• Even in standby mode or Eco Standby mode, the alarm
function is available.
Auto Standby (☞ page 5)
• This unit has a function that automatically activates standby
mode when no audio signal is input from a connecting device,
or when the connecting device is playing at a low volume for a
certain period (about 20 minutes).
y Dimmer function
Press CLOCK repeatedly to set the
brightness of the display and indicators.
3 (brightest) 2 1 (darkest)
I Grille (☞ page 3)
A VOLUME
Controls volume. When you
control the volume, the volume
level will be displayed on the
display for a while.
B CLOCK
Sets the clock (☞ page 4).
C ALARM
Sets the alarm (☞ page 4).
D TUNING
Adjust the time or radio frequency
(☞ page 4, 6).
E PRESET
Stores up to five favorite FM radio
stations (☞ page 6).
F SOURCE (PAIRING)
Selects an input source from
(Bluetooth), AUX, or RADIO.