Owner`s manual

4 En
OPERATION
This unit can play back the radio and emit beeps at the set time.
■ Setting the time and sound
BASIC FUNCTIONS
Adjusting the clock
A Press and hold CLOCK for more than
2 seconds.
The display flashes.
B Adjust the time with TUNING.
y
If you press and hold TUNING, the numbers
advance quickly.
C Press CLOCK.
If you want to cancel clock setting mode, press .
y
If you press PRESET in step B, you can select the
time display method (12 hours/24 hours).
The time settings are lost approximately one week after
unplugging the unit.
Alarm setting
A Press and hold ALARM for more than
2 seconds.
The alarm indicator ( ), the RADIO
indicator and display flash.
B Set the alarm time with TUNING .
C Set the alarm volume with VOLUME.
The volume level is displayed.
D Press ALARM.
Alarm is set and the alarm indicator ( ) lights.
y
• The alarm type of this unit is the radio and beeping
only.
• The radio turns on 3 minutes before the alarm time
and beeping starts at the alarm time.
If you press ALARM to complete the setting of the alarm
without changing the alarm time and volume, the alarm
setting mode will be cancelled and the alarm will not be set
to on.
A
,
C
B
Note
A
,
D
C
B
RADIO indicator
Alarm
indicator
()
Note