User Manual

Play from an input source
13
Bluetooth speakers or headphones can be used to listen to
audio played via the unit.
Note
• This function cannot be used when Bluetooth is selected as the
input source. Select an input source other than Bluetooth.
• Be sure to use Bluetooth speakers or headphone that are equipped
with a volume control. Volume must be adjusted using the
Bluetooth speakers or headphones. Volume cannot be adjusted
from this unit.
• Use the volume control on the Bluetooth speakers or headphones
to turn down the volume, and then connect the speakers or
headphones to the unit. Failure to turn down the volume before
connecting may result in extremely loud playback to begin when
the Bluetooth connection is established.
1 Set Bluetooth speakers or headphones to
pairing mode.
2 Press OPTION on the remote control.
3 Use e/r to select , and press ENTER.
4 Use q/w to select Bluetooth TX, and press
ENTER.
5 Use q/w to select ON, and press ENTER.
6 Press ENTER.
Bluetooth speakers or headphones that can be
connected to the unit will be detected and displayed.
Using Bluetooth speakers/headphones
to listen to audio (transmitting)
Bluetooth speakers or headphones
BLUETOOTH
BLUETOOTH Transmission
ON
Next
qwer
ENTER
OPTION