Owner's Manual

Play from an input source
17
You can confirm the DAB signal level. This is useful when
setting up the antenna.
1 Press OPTION when DAB is selected as the
input source.
2 Use e/r to select , and press ENTER.
3 Use q/w to select Tuning Aid, and press
ENTER.
The Tuning Aid display is shown.
4 Press ENTER.
5 Press q/w to change the channel label.
The measured DAB signal reception level is displayed.
The level is from 0 (none) to 100 (best).
6 Press OPTION to exit the settings display.
Note
When the DAB signal is weak in Tuning Aid, try adjusting the position
of the antenna to obtain good reception.
Confirming the reception
DAB
DAB Tuning Aid
11B : 100%
Exit
qwer
ENTER
OPTION