Owner's Manual

31
Useful features
Alarm (IntelliAlarm)
Five alarm options—music, beeps, combination of music and beeps—are available. A CD, USB flash drive, radio station, or network content can be selected as the source of music
used for the alarm (alarm source).
The following types of playback can be selected according to the alarm source.
Note
When using a CD, USB flash drive, or network content as the alarm source, be sure the CD is
loaded, the USB flash drive is connected, or the unit is connected to a network. If the proper
alarm source is not available, music will not play, and only beeps will sound when the alarm is
triggered.
Alarm type
Music only
Music begins playing at the specified time.
Music begins playing at low volume 10 seconds prior to the
specified time, increasing to the specified volume at the specified
time.
Music + beeps
Music begins playing at the specified time and beeps begin
sounding at the same time.
Music begins playing at low volume three minutes prior to the
specified time, increasing to the specified volume at the specified
time. Beeps begin sounding over the music at the specified time.
Beeps only Beeps begin sounding at the specified time.
Alarm sources (CD, USB flash drive, radio station, and
network content)
CD
Audio CD
• Specified song: Play the specified song repeatedly.
• Resume playback: Play from the last song played.
Data CD
• Specified folder: Play the specified folder.
• Resume playback: Play from the last song played.
USB • Resume playback: Play from the last music file played.
Radio station
• Specified radio station: Select from preset stations to play
(
&
p. 16, 18).
• Resume playback: Play the radio station last received.
Network content
Note
Network content can only be selected using the MusicCast
CONTROLLER app.
• Specified network content: Select from network content
such as Internet radio that has been registered with the
MusicCast CONTROLLER app.
• Resume playback: Play the last network content played.