Owner's Manual

Connecting to a network manually

Using WPS (Wi-Fi Protected Setup) to

connect to a network wirelessly

A wireless LAN router (access point) equipped with a WPS button is required.

1 Press OPTION.

2 Select in the option menu.

Select Network route setting>Wireless (Wi-Fi)>WPS

Button and follow the instructions in the display to

complete setup.

The + indicator glows when a connection has been

established.

Note

• WPS cannot be used when a network cable is connected to the

unit.

• A wireless connection may not be established if the unit and the

wireless LAN router (access point) are too far apart. If you experience

difficulty establishing a wireless connection, position the unit and

the wireless router (access point) closer to each other.

NETWORK

WPS

Wi-Fi Protected Setup (WPS) is a standard established by

the Wi-Fi Alliance to allow for easy establishment of a

wireless network.

OPTION