Operation Manual
FOR YOUR SAFETY – PRE-OPERATION CHECKS
5-2
5
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
7-23
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
7-21, 7-22
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
7-15, 7-17
Shift pedal
• Make sure that operation is smooth.
• Correct if necessary.
7-20
Brake pedal
• Make sure that operation is smooth.
• Lubricate pedal pivoting point if necessary.
7-24
Brake lever
• Make sure that operation is smooth.
• Lubricate lever pivoting point if necessary.
7-23
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
7-24
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Engine stop switch • Check operation. 4-1
ITEM CHECKS PAGE
U5B685E0.book Page 2 Tuesday, July 10, 2012 5:06 PM