Operation Manual

FOR YOUR SAFETY – PRE-OPERATION CHECKS

5-2

Control cables

• Make sure that operation is smooth.

• Lubricate if necessary.

7-20

Drive chain

• Check chain slack.

• Adjust if necessary.

• Check chain condition.

• Lubricate if necessary.

7-18, 7-19

Wheels and tires

• Check for damage.

• Check tire condition and tread depth.

• Check air pressure.

• Correct if necessary.

7-13, 7-14

Shift pedal

• Make sure that operation is smooth.

• Correct if necessary.

7-17

Brake pedal

• Make sure that operation is smooth.

• Lubricate pedal pivoting point if necessary.

7-21

Brake lever

• Make sure that operation is smooth.

• Lubricate lever pivoting point if necessary.

7-20

Sidestand

• Make sure that operation is smooth.

• Lubricate pivot if necessary.

7-21

Chassis fasteners

• Make sure that all nuts, bolts and screws are properly tightened.

• Tighten if necessary.

—

Engine stop switch • Check operation. 4-1

ITEM CHECKS PAGE

U2CJ80E0.book Page 2 Tuesday, June 12, 2012 11:15 AM