Operation Manual

PRE-OPERATION CHECKS
4-3
4
Brake pedal
• Make sure that operation is smooth.
• Lubricate pedal pivoting point if necessary.
6-21
Brake lever
• Make sure that operation is smooth.
• Lubricate lever pivoting point if necessary.
6-22
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
6-22
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Engine stop switch • Check operation. 3-1
ITEM CHECKS PAGE
U3P281E0.book Page 3 Monday, April 17, 2006 11:26 AM