Operation Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
6-12
6
EAU41230
Cleaning the spark arrester
The spark arrester should be cleaned
at the intervals specified in the periodic
maintenance and lubrication chart.
WARNING
EWA10980
● Always let the exhaust system
cool prior to touching exhaust
components.
● Do not start the engine when
cleaning the exhaust system.
NOTE:
Make sure to select a well-ventilated
area free of combustible materials to
clean the spark arrester.
1. Remove the tailpipe by removing
the bolt, and then pulling it out of
the muffler.
2. Tap the tailpipe lightly, and then
use a wire brush to remove any
carbon deposits from the spark ar-
rester portion of the tailpipe and in-
side of the tailpipe housing.
3. Insert the tailpipe into the muffler,
and then install and tighten the
bolt.
NOTE:
Make sure to align the bolt hole when
inserting the tailpipe.
1. Bolt
1. Tailpipe
2. Spark arrester
U3P281E0.book Page 12 Monday, April 17, 2006 11:26 AM