User Guide
Table Of Contents
- Contents
- Notice
- Product Overview
- Charging and Powering
- Connections
- Wearing this product
- Operating this Product
- Settings
- Troubleshooting
- Read this first
- No sound can be heard
- Sound can only be heard from one earphone
- Power will not turn on
- The product cannot be charged
- Cannot connect to a Bluetooth device
- The product does not operate or play back
- The sound is distorted, noisy or choppy
- Restoring this product to factory defaults (Initialize / Reset)
- Problem Still Not Resolved (Customer Support)
- Appendix
3 Keep pressing the function key on the earphone (L) until its indicator lights up as
shown below.
You will hear the “Power On” audio message in the earphones.
2 sec
Blue
1 sec
4 Activate the Bluetooth function on the Bluetooth device.
A list of Bluetooth devices that can be connected will be shown.
5 Select this product from this list on your Bluetooth device.
If successfully connected, you will hear the “Pairing Successful” audio message.
The indicator on the earphone will light up as shown below.
Blue
20 sec
Next, you will see a message to register (pair) the other earphone. Follow the instructions to
register (pair).
The other earphone may be listed as “Headset,” depending on the Bluetooth device.
21
Connections > Registering (pairing) a different Bluetooth device