User Guide
Table Of Contents
- Contents
- Notice
- Product Overview
- Charging and Powering
- Connections
- Wearing this product
- Operating this Product
- Settings
- Troubleshooting
- Read this first
- No sound can be heard
- Sound can only be heard from one earphone
- Power will not turn on
- The product cannot be charged
- Cannot connect to a Bluetooth device
- The product does not operate or play back
- The sound is distorted, noisy or choppy
- Restoring this product to factory defaults (Initialize / Reset)
- Problem Still Not Resolved (Customer Support)
- Appendix
NOTE
(
Pairing standby mode will automatically end after about two minutes. To register again, start from step 1.
(
Up to 3 devices can be registered with this product. From the 4th device on, older registrations will be deleted (the oldest is deleted
first).
(
If a passkey is required when connecting, input “0000”.
(
You can also set the earphones in registration (pairing) mode by disconnecting the earphones with the connected Bluetooth
device.
Related links
(
“Connecting to a Bluetooth device”(p.23)
(
“Disconnecting from a Bluetooth device”(p.24)
(
“About the app for earphones/headphones”(p.32)
22
Connections > Registering (pairing) a different Bluetooth device