User Manual
Table Of Contents
- Contents
- Introduction
- Charging and Powering
- Bluetooth® Connectivity
- Wearing This Product
- Operation (Music Playback and Phone Calls)
- Dedicated Application
- Troubleshooting
- Read this first
- Cannot connect
- Power will not turn on
- The product cannot be charged
- The product does not operate or play back
- No sound can be heard
- Sound can only be heard from one earphone
- Sound is not good or sounds strange
- The sound is distorted, noisy or choppy.
- Using only one of the earphones
- Resetting and initializing the product
- Updating the firmware
- List of support centers
- Appendix
Turning on the power
Turn on the earphones.
1 Remove the earphones from the charging case.
The indicators light up as shown below, and the power turns on.
Blue
Lights up for 1 sec
NOTE
(
If the earphones have been removed from the charging case or if they do not turn on when removed from the charging case, hold
down the function key on each earphone (L, R) until their indicators light up blue.
(
When an earphone is low on battery power, its indicator will flash red three times when the power is turned on. If this happens,
charge the earphone.
Related links
“Remaining Battery Power”(p.14)
12
Charging and Powering > Turning on the power