User Manual
Table Of Contents
- Contents
- Introduction
- Charging and Powering
- Bluetooth® Connectivity
- Wearing This Product
- Operation (Music Playback and Phone Calls)
- Dedicated Application
- Troubleshooting
- Read this first
- Cannot connect
- Power will not turn on
- The product cannot be charged
- The product does not operate or play back
- No sound can be heard
- Sound can only be heard from one earphone
- Sound is not good or sounds strange
- The sound is distorted, noisy or choppy.
- Using only one of the earphones
- Resetting and initializing the product
- Updating the firmware
- List of support centers
- Appendix
NOTE
(
Pairing standby mode will automatically end on this product after about two minutes. To pair again or if the connection was
unsuccessful, place the earphones back into the charging case and start again at step 1.
(
The other earphone may be listed as “Disconnected” on the setting screen of your Bluetooth device. However, this is not a problem
if you can hear the audio in both earphones.
(
For Bluetooth devices that support Qualcomm TrueWireless™ Stereo Plus (TWS+), the status of both earphones will be
“Connected.”
Related links
(
“Pairing with a Different Device”(p.18)
(
“Connecting to a Device Already Paired”(p.21)
(
“Using the “Headphones Controller” app”(p.27)
17
Bluetooth® Connectivity > Pairing for the First Time