User Manual
Table Of Contents
- Contents
- Introduction
- Charging and Powering
- Bluetooth® Connectivity
- Wearing This Product
- Operation (Music Playback and Phone Calls)
- Dedicated Application
- Troubleshooting
- Read this first
- Cannot connect
- Power will not turn on
- The product cannot be charged
- The product does not operate or play back
- No sound can be heard
- Sound can only be heard from one earphone
- Sound is not good or sounds strange
- The sound is distorted, noisy or choppy.
- Using only one of the earphones
- Resetting and initializing the product
- Updating the firmware
- List of support centers
- Appendix
4 Select this product from the list on your Bluetooth device.
If a passkey is required when connecting, input “0000”.
Yamaha TW-E3B R
If successfully connected, you will hear the “Pairing Successful” audio message in the
earphone. The earphone indicator lights up as shown below.
Earphone (R)
Blue
Lights up for 20 sec
5 Hold down the function key on the earphone (L) for about two seconds, until its
indicator lights blue.
2 sec
Blue
Lights up for 1 sec
Earphone (L)
After this, the indicator lights up purple for one second, and the earphone is ready for use.
When you see a message on your Bluetooth device to register (pair) earphone (L), follow the
instructions to pair. The other earphone may be listed as “Headset,” depending on the
Bluetooth device.
19
Bluetooth® Connectivity > Pairing with a Different Device