User Manual
Table Of Contents
- Contents
- Introduction
- Charging and Powering
- Bluetooth® Connectivity
- Wearing This Product
- Operation (Music Playback and Phone Calls)
- Dedicated Application
- Troubleshooting
- Read this first
- Cannot connect
- Power will not turn on
- The product cannot be charged
- The product does not operate or play back
- No sound can be heard
- Sound can only be heard from one earphone
- Sound is not good or sounds strange
- The sound is distorted, noisy or choppy.
- Using only one of the earphones
- Resetting and initializing the product
- Updating the firmware
- List of support centers
- Appendix
List of indicator displays and audio messages
The indicator displays and audio messages on this product are shown below.
Earphone indicator display
(
Power on
Lights up for 1 second (blue) and turns off
(
Remaining battery power notifications
Flashes red three times: small amount of charge remaining
(
Standby mode for pairing with Bluetooth device
Flashes (between red and blue alternately)
(
Searching for paired Bluetooth device
Not lit
(
Finished connecting to Bluetooth device
Lights up (blue, for approx. 20 sec) and turns off
(
Power off
Lights for one second (red) and turns off
(
Connection with earphone (L) and earphone (R) complete
Lights up for one second (purple) and turns off
Indicator display when charging
(
Charging
Lights up (red)
(
Charging completed
Not lit
Charging case indicator display
When the charging case is not connected to a power source
(
For five seconds right after placing the earphones in the charging case
Shows the remaining battery power of the charging case and turns off
When the charging case is connected to a power source
(
Shows the remaining battery power of the charging case
47
Appendix > List of indicator displays and audio messages