User Manual
Table Of Contents
- Contents
- Introduction
- Charging and Powering
- Bluetooth® Connectivity
- Wearing This Product
- Operation (Music Playback and Phone Calls)
- Dedicated Application
- Troubleshooting
- Read this first
- Cannot connect
- Power will not turn on
- The product cannot be charged
- The product does not operate or play back
- No sound can be heard
- Sound can only be heard from one earphone
- Sound is not good or sounds strange
- The sound is distorted, noisy or choppy.
- Using only one of the earphones
- Resetting and initializing the product
- Updating the firmware
- List of support centers
- Appendix
Specifications
The specifications of this product are as shown below.
(
Driver type
Dynamic
(
Driver unit
6.0 mm
(
Frequency range
20–20,000 Hz
(
Bluetooth version
5.0
(
Supported profiles
A2DP, AVRCP, HFP, HSP
(
Supported codecs
SBC, AAC, Qualcomm® aptX™
(
Supported content protection (Japan only)
SCMS-T
(
RF output power
Class 1
(
Maximum communication range
10 m (33 ft) (without obstructions)
(
Maximum number of pairable devices
3
Rechargeable battery
(
Internal rechargeable battery
Lithium-ion battery
(
Charging time (to full capacity)
Earphones: approx. 2 hours
Charging case: approx. 2 hours
(
Continuous playback time
Approximately 6 hours
Number of earphone charging cycles available with charging case (when charging case is fully charged)
Approx. 3 times
(
Temperature range for usage (when charging)
5–40°C
Charge this product within the listed temperature range.
General
(
Waterproof rating
IPX 5 (earphones)
(
Weight
5.0 g (per earphone)
49
Appendix > Specifications