Owner's Manual
Table Of Contents
- User Guide
- Contents
- Introduction
- Charging and Powering
- Bluetooth® Connectivity
- Wearing This Product
- Operation (Music Playback and Phone Calls)
- Dedicated Application
- Troubleshooting
- Read this first
- Cannot connect
- Power will not turn on
- The product cannot be charged
- The product does not operate or play back
- No sound can be heard
- Sound can only be heard from one earphone
- Sound is not good or sounds strange
- The sound is distorted, noisy or choppy.
- Using only one of the earphones
- Resetting and initializing the product
- Updating the firmware
- List of support centers
- Appendix
- Quick Start Guide
- Safety Brochure
2 Hold down the function key on both earphones (L, R) for about seven seconds until
their indicators flash purple.
After the indicators flash purple twice, they will light up red again.
Purple
Flashes two times
Red
Lights up
3 Remove the earphone (R) from the charging case.
Make sure that the indicator lights up as shown below.
Red Blue
Flashes alternately
Next, perform step 4 within eight seconds.
41
Troubleshooting > Resetting and initializing the product