Owner's Manual
Table Of Contents
- User Guide
- Contents
- Introduction
- Charging and Powering
- Bluetooth® Connectivity
- Wearing This Product
- Operation (Music Playback and Phone Calls)
- Dedicated Application
- Troubleshooting
- Read this first
- Cannot connect
- Power will not turn on
- The product cannot be charged
- The product does not operate or play back
- No sound can be heard
- Sound can only be heard from one earphone
- Sound is not good or sounds strange
- The sound is distorted, noisy or choppy.
- Using only one of the earphones
- Resetting and initializing the product
- Updating the firmware
- List of support centers
- Appendix
- Quick Start Guide
- Safety Brochure
Charging and Powering
Charging the earphones
Charge the earphones before use by placing them in the charging case.
CAUTION
(
The charging case is not waterproof. Thoroughly wipe off any sweat, rainwater, seawater or other liquids that get on the
earphones before placing them back in the charging case.
(
Charge this product within a temperature range of 5 to 40ºC.
1 Open the charging case lid.
2 Place the earphones in the charging case.
The earphone indicators light up red while charging, and turn off when charging is completed.
Charging takes about 2 hours.
NOTE
(
When the remaining battery power of the charging case is completely depleted while charging the earphones, the earphones will
turn on.
(
Once you place the earphones in the charging case, the indicators on the charging case will show the remaining battery power for
five seconds (except when the charging case itself is still charging).
(
The earphones will not connect to Bluetooth or be used for playback while charging.
Related links
“Appendix”(p.45)
9
Charging and Powering > Charging the earphones