Owner's Manual
Table Of Contents
- User Guide
- Contents
- Introduction
- Charging and Powering
- Bluetooth® Connectivity
- Wearing This Product
- Operation (Music Playback and Phone Calls)
- Dedicated Application
- Troubleshooting
- Read this first
- Cannot connect
- Power will not turn on
- The product cannot be charged
- The product does not operate or play back
- No sound can be heard
- Sound can only be heard from one earphone
- Sound is not good or sounds strange
- The sound is distorted, noisy or choppy.
- Using only one of the earphones
- Resetting and initializing the product
- Updating the firmware
- List of support centers
- Appendix
- Quick Start Guide
- Safety Brochure
Charging the charging Case
To charge the charging case, connect the included USB power adapter.
CAUTION
(
The charging case is not waterproof. Do not expose this product to liquids such as sweat, rainwater or seawater.
(
Be sure to use the USB power cable that was included with this product.
(
When using a USB power adapter, be sure that the commercially-available adapter is compatible with 5 V DC (at least 0.5 A)
power output.
(
When charging this product inside of China, be sure to use a USB power adaptor that is approved by CCC.
(
Charge this product within a temperature range of 5 to 40ºC.
1
2
3
Front
Charging indicators
1 Plug the USB power cable (type C side) into the charging case.
2 Plug the USB power cable (type A side) into the USB power adaptor.
3 Plug the USB power adaptor into the power outlet.
Charging will begin. Charging takes about 2 hours.
While the case is charging, the indicators light up as shown below.
Remaining battery power Indicator
100%
75–100%
50–75%
25–50%
0–25%
: Lights up
: Flashes : Not lit
10
Charging and Powering > Charging the charging Case