Owner's Manual
Table Of Contents
- User Guide
- Contents
- Introduction
- Charging and Powering
- Bluetooth® Connectivity
- Wearing This Product
- Operation (Music Playback and Phone Calls)
- Dedicated Application
- Troubleshooting
- Read this first
- Cannot connect
- Power will not turn on
- The product cannot be charged
- The product does not operate or play back
- No sound can be heard
- Sound can only be heard from one earphone
- Sound is not good or sounds strange
- The sound is distorted, noisy or choppy.
- Using only one of the earphones
- Resetting and initializing the product
- Updating the firmware
- List of support centers
- Appendix
- Quick Start Guide
- Safety Brochure
Pairing with a Different Device
Follow the steps below to pair with another Bluetooth device, or to try pairing with the same device again.
It's important to turn off both earphones (L, R) before doing this.
[Search tag] #Q02 Pairing
1 With the power on the earphones (L, R) turned on, keep pressing their function
keys until their indicators light up red.
The power will turn off.
5 sec
Red
Lights up for 1 sec
Earphone (L) Earphone (R)
2 Keep pressing the function key on earphone (R) until its indicator lights up as
shown below.
You will hear the “Pairing” audio message in earphone (R), and the earphone will enter pairing
standby mode.
5 sec
Blue Red
Flashes alternately
Earphone (R)
3 Activate Bluetooth on the Bluetooth device.
A list of Bluetooth devices that can be connected will be shown.
18
Bluetooth® Connectivity > Pairing with a Different Device