User Manual

3 Select this product from this list on your Bluetooth device.
Yamaha TW-E5A R
If successfully connected, you will hear the “Pairing Successful” audio message.
The indicator on the earphone will light up as shown below.
Blue
20 sec
Next, you will see a message to register (pair) the other earphone. Follow the instructions to
register (pair).
The other earphone may be listed as “Headset,” depending on the Bluetooth device.
NOTE
(
Pairing standby mode will automatically end after about two minutes. To register again, start from step 1.
(
Up to 3 devices can be registered with this product. From the 4th device on, older registrations will be deleted (the oldest is deleted
first).
(
If a passkey is required when connecting, input “0000”.
(
You can also set the earphones in registration (pairing) mode by disconnecting the earphones with the connected Bluetooth
device.
Related links
(
“Registering (pairing) a different Bluetooth device”(p.21)
(
“Connecting to a Bluetooth device”(p.24)
(
“Disconnecting from a Bluetooth device”(p.25)
(
“About the app for earphones/headphones”(p.33)
20
Connections > Registering a Bluetooth device (pairing)