User Manual
Table Of Contents
- Contents
- Introduction
- Charging and Powering
- Bluetooth® Connectivity
- Wearing This Product
- Operation (Audio Playback and Phone Calls)
- Dedicated Application
- Troubleshooting
- Read this first
- Cannot connect
- Power will not turn on
- The product cannot be charged
- The product does not operate or play back
- No sound can be heard
- Sound can only be heard from one earbud
- Sound is not good or sounds strange
- The sound is distorted, noisy or choppy
- Using only one of the earbuds
- Initializing (performing a factory reset)
- Updating the firmware
- List of support centers
- Appendix
1 Open the charging case lid.
2 Place the earbuds in the charging case.
The earbud indicators light up red while charging, and turn off when charging is completed.
Charging takes about 1.5 hours.
NOTE
(
Once you place the earbuds in the charging case, the indicators on the charging case will show the remaining battery power for five
seconds (except when the charging case itself is still charging).
(
You cannot connect the earbuds via Bluetooth or use them for playback while they are recharging.
Related links
“Appendix”(p.46)
11
Charging and Powering > Charging the earbuds